NT$ 8,250
Home » MIDI Equipment » MIDI Interface » Kenton USB Solo Converter
產品特色
由於直接由 USB 連接和供電，USB Solo 可以滿足從電腦上控制模擬合成器的需求。不需要MIDI接口，也不需要外部電源，因此線材的混亂程度降到了最低。但 USB Solo 仍然保持著 Kenton 著名的 tuning 穩定性，以及由於內部電路，CV 和輔助輸出的全刻度範圍。
CV 輸出可以在 1V/Oct 、Hz/Volt 或 1.2V/Oct 下運行。scaling 和 tuning 都可以調整，用以搭配任何類型的合成器。Gate Output 可以在幾個不同的電壓下使用，也可以設置為 S-trig 使用。此外，USB Solo 還有一個 Sync24 輸出，所以舊款的 Roland 設備同樣也可以使用。
Kenton USB Solo Converter 是一個符合等級標準的 USB MIDI 轉換器，不需要安裝任何驅動程序，即插即用。
詳細規格
- 電源: Power is supplied by the USB host device via the USB cable
- 尺寸: 130 x 97 x 40 mm
- 重量: 450g
- MIDI: In & Out (via USB)
- Analog Outputs: CV on 3.5mm mono jack (V/oct or Hz/V or 1.2V/oct)
- Gate on 3.5mm mono jack (Gate or S-trig – with or without pullups)
- Aux1 on 3.5mm mono jack (CV and Aux 1 use 16bit DAC for rock steady pitches)
- Digital Outputs Aux2 & Aux3 on 3.5mm mono jacks (off=0 volts on=+5 volts)
- Sync 24 on 5 pin 180 degree DIN socket
- USB Connector Type B socket – USB A to B cable supplied 1.8 metre
- Please refer to the manual for more details
- Designed to control all types of mono-synth
- Super-fast response time
- Famous Kenton build quality
- Rugged brushed aluminium case
- CV and Aux1 outputs use high specification 16 bit D/A converters for rock-steady pitches
- Gate / S-trig output configurable output to match virtually any synth
- Aux2 & Aux3 outputs are on-off only (zero or 5V)
- Dedicated DIN socket output for Sync24
- CV/Gate/Aux1,2,3 outputs on 3.5mm jack sockets (3.5mm to 1/4″ cables are available in our cables section)
- Any MIDI channel can be selected
- Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
- Fine tune & scale are software controllable
- Transpose (coarse tune) – up & down 12 semitones
- Adjustable pitchbend range
- Programmable Gate V-trig (up to 15v) or S-trig (with or without pull-up)
- Multiple and single trigger modes – adjustable re-trigger time
- Note priority selection – newest / lowest / highest
- Old notes are remembered to facilitate trill effects and increase playability
- Portamento – fixed rate or fixed time modes
- Auto Portamento mode selectable (where legato playing turns on Portamento)
- Portamento Controller is selectable
- Programmable Auxilary outputs controllable by any MIDI controller
- Programmable LFO – 9 wave shapes inc. random
- LFO can modulate pitch &/or AUX output
- Separate Controllers for LFO to CV and LFO to AUX
- LFO can be synchronised to MIDI clock
- LFO sync point can be selected
- Key-on can reset LFO
- Aux3 output can output clock – Aux2 can output stop-start
- Clock output can select from 1 to 12, 24, or 48 clocks per quarter note
- All parameters are controllable in real-time by SysEx
- Set-ups are stored in non-volatile memory for easy recall
- 40 memory locations for store / load
- MIDI monitor mode – for easy MIDI troubleshooting
- USB powered
- Size 130mm x 97mm x 40mm
- Suitable for use with XP / Vista / MAC OS-X v10.2 onwards / Linux
- Improvements over Pro-Solo mkII
- USB connection – faster data transfer
- Has 40 memories which can be stored and recalled
- Setups pre-loaded for popular synths
- Dedicated DIN Sync-24 output
- Aux 2 & 3 on 3.5mm jacks
- Variable gate-off time for re-trigger (multiple trigger)
- LFO start point can now be selected for Sample & Hold too
- Aux 2 & 3 have adjustable threshold
- Program changes can be used to recall memories
Reviews:
Purchase FAQ
Q1. What is the inspection period?
According to the Consumer Protection Act, online purchases come with a 7-day inspection period starting from the delivery date. Please note that the "inspection period is not a trial period." The purpose is for you to inspect and review the product, not to use it. If you are unsatisfied after inspection, please do not open or use the product and follow the return procedures immediately. Returned products must be in complete packaging with all accessories, gifts, and original packaging intact. Any missing, damaged, or incomplete items may affect your return rights and restoration costs may be deducted.
Q2. How do I process a return or exchange?
If you wish to return a product, please ensure it is in complete, new condition with the original packaging undamaged. This includes the product itself, accessories, warranty card, original packaging, and all accompanying documents. If the product is damaged due to reasons attributable to you, we may not be able to process the return, or repair costs may be deducted from the refund. However, products with manufacturing defects are exempt and qualify for unconditional return or exchange.
Please contact us by phone or email within the inspection period, providing the reason for the return/exchange, current product condition, phone number, and pickup address. We will arrange the return within 3-5 business days.
Q3. How will I receive my refund, and how long does it take?
Refund methods and timelines vary by payment method:
Credit Card: After we receive the returned product, the refund will be credited to your credit card account within approximately 5-7 business days. Depending on your billing cycle, the refund may appear on your current or next statement. Please confirm with your credit card issuing bank.
Bank Transfer: Please contact service [at] digilog.tw with your complete bank details (bank name, branch name, bank code, account holder name, account number). We will arrange courier pickup of the returned product and transfer the refund to your designated account within 5-7 business days.
Q4. Do I need to pay for shipping when sending products for repair?
Round-trip shipping costs for product repairs are the customer's responsibility.
You may be interested in:
-11%
What's New
Brands
Rental
目前尚無評論