產品特色

Pro Solo mk3 是 Kenton Pro Solo 系列的最新產品，與上一代產品有許多不同；包括3個連續可變的輔助輸出，一個內置的 ADSR envelope generator，MIDI CCs 等等。

Pro Solo mk3 具有高度的可配置性，對於希望將模擬合成器（不管是機型相對老舊的還是其他類型的）納入 MIDI 配置的用戶來說，是一台理想的轉換器。 CV 輸出可以在 1V/Oct、Hz/Volt 或 1.2V/Oct 下運行。Scaling 和 Tuning 都可以調整，以適應多種類型的合成器。Gate 輸出能夠在一些不同電壓的情況下使用，也可以設置為 S-trig 使用。

三個連續可變的輔助輸出在 3.5mm 上，可以配置為響應 MIDI CCs、velocity、aftertouch、clock 等等。除此之外，MIDI OUT 端口可以切換到輸出 Sync24 ，舊款的 Roland 設備也能使用。

詳細規格

• 電源 : 9V DC (regulated or unregulated) – never apply more than 12V(never use an unregulated supply greater than 9V as unregulated supplies typically give a higher output than shown). 9V switch mode power supply included.
• 尺寸 : 140 x 87 x 45 mm
• 重量 : 210g
• MIDI: In, Thru (selectable)
• Analogue Outputs: CV on 3.5mm jack (V/oct or Hz/V)
• Gate on 3.5mm jack (Gate or S-trig)
• Aux 1, 2 & 3 on 3.5 mm jack
• Sync 24 Output: MIDI Thru socket switchable to work as Sync 24 output instead, with variable CPQN ratio
• Please refer to the manual for more details
• Designed to control all types of mono-synth
• Super-fast response time
• Famous Kenton build quality
• Rugged brushed aluminium case
• CV output uses high specification 16 bit D/A converter for rock-steady pitches
• Runs from standard 9 volt power supply, 2.1mm centre positive
• CV/Gate/Aux outputs on 3.5mm jack sockets (3.5mm to 1/4″ cables are available in our cables section)
• MIDI IN socket
• MIDI THRU socket can be switched to become Sync 24
• Any MIDI channel can be selected
• Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
• Fine tune & scale are controllable using the edit buttons & settings can be stored
• Transpose (coarse tune) – up & down 12 semitones
• Adjustable pitchbend range
• Programmable Gate V-trig (up to 15v) or S-trig (with or without pull-up)
• Multiple and single trigger modes
• Note priority selection – newest / lowest / highest
• Old notes are remembered to facilitate trill effects and increase playability
• Portamento – fixed rate or fixed time modes
• Auto Portamento mode selectable (where legato playing turns on Portamento)
• Portamento Controller is selectable
• Three programmable Aux variable analogue outputs, controllable by any MIDI controller
• Programmable LFO – 9 wave shapes inc. random
• LFO can modulate pitch &/or Aux 1 output
• Separate Controllers for LFO to CV and LFO to Aux 1
• LFO can be synchronised to MIDI clock
• LFO sync point can be selected
• Key-on can reset LFO
• Aux outputs can output clock, with two individual dividers to choose from
• All parameters are controllable in real-time by SysEx
• 32 setups can be stored in non-volatile memory for easy recall
• MIDI Analyser mode – for easy MIDI troubleshooting
• Power supply included – UK / EU / USA / Australian types available

What’s new or different about the Mk3?

• Aux 2 & Aux 3 are now continuously variable analogue outputs and are presented on 3.5mm jack sockets
• Expanded selection of Controllers available for the Aux outputs
• The Aux outputs now have adjustable slew rate (rise/fall time) to enable you to smooth out any controller jumps
• Built-in ADSR envelope generator (the controls for which can be assigned to MIDI CCs)
• Drum Trigger mode – Aux outputs can be set to produce a velocity-variable trigger pulse for drum synths, each with its own dedicated trigger note
• Dual clock dividers, which can be used simultaneously on different outputs, including the DIN socket when not used as MIDI out
• Variable gate-off time for re-trigger (multiple trigger)
• 32 program memories which can store and recall setups
• MIDI Program Changes can be used to recall setups
• Pre-loaded setups for many of the most popular synths
• Pitchbend range increased to 48 notes up & down
• Flash upgradable using SysEx when updates become available
• 32 bit ARM processor
• Brushed aluminium case with black text