Erica Synths Drum Series 立體聲濾波器模組,以 DJ 混音台濾波控制器的設計邏輯移植至 Eurorack 系統。類比 24dB SVF(State Variable Filter)電路驅動,Cutoff 旋鈕位於 12 點鐘位置時訊號完全直通,逆時針轉動進入 Low Pass 模式,順時針轉動切換為 High Pass 模式,單一旋鈕即可完成低頻至高頻的連續掃描。立體聲左右(L/R)輸入與輸出各自獨立,可對 L/R 訊號進行分別處理,適合處理立體聲鼓組混音、立體聲取樣器輸出或整體鼓機 Bus 的頻率塑型。Resonance 可推至自激(Self-Oscillation),並提供兩路 Cutoff CV 輸入(其中一路附 CV-LVL 衰減旋鈕)實現 CV 控制下的動態掃頻。
DJ 風格 Cutoff 控制 — 單旋鈕 LP ↔ HP 連續掃描
・Cutoff 旋鈕 12 點鐘位置:訊號全通,無任何濾波作用
・逆時針(CCW):Low Pass 模式,高頻逐漸截止,音色趨向厚重暗沉
・順時針(CW):High Pass 模式,低頻逐漸截止,音色趨向尖銳明亮
・單旋鈕操作直覺對應 DJ 混音台習慣,現場演出掃頻演奏效率高
24dB SVF 類比濾波電路 + 自激共鳴
・24dB/oct State Variable Filter 類比電路,音色質感飽滿有厚度
・Resonance 旋鈕從 1 點鐘位置起可推入自激(Self-Oscillation),產生正弦波振盪音
・自激狀態可作為正弦波音源使用,大幅擴展模組應用場景
CV-LVL 雙路 CV 輸入
・CV1 輸入附 CV-LVL 衰減旋鈕:控制 CV 調制深度,並影響 LP 至 HP 轉換過程中的開合程度,在 LP 截止與 HP 截止之間驅動訊號過渡
・CV2 輸入:獨立 Cutoff CV,不受 CV-LVL 旋鈕影響,適合疊加第二路調制訊號
・兩路 CV 輸入同時使用可創造複雜的掃頻運動與動態頻率演進
立體聲 L/R 分路處理
・左右聲道輸入(L/R In)與輸出(L/R Out)各自獨立
・L/R 訊號在進入輸出前可分別處理,適合不對稱立體聲效果或對左右聲道施加不同 CV 調制
・可直接接入立體聲取樣器、Stereo FX 模組輸出或鼓組 Bus 的 L/R 訊號
訊號規格
・音頻電平:10 Vptp
・CV 輸入電壓:-10V – +10V
・濾波器特性:24dB/oct SVF(State Variable Filter)
模組規格
・面板寬度:8 HP
・模組深度:35 mm
・電源消耗:109 mA @+12V,101 mA @-12V
Orders over NT$3,000 qualify for free shipping. Orders under NT$3,000 incur a NT$120 shipping fee. In-store pickup is always free.
We accept: credit card (single payment, or 3/6-month installments), bank transfer, convenience store payment code, cash on delivery, in-store payment, and AFTEE deferred payment. Installments are currently available only for credit cards issued by CTBC Bank, E.SUN Bank, and Taishin Bank. Cash on delivery is not available for software products or orders over NT$10,000.
E-invoices are issued for all purchases and sent automatically to your registered email. Once a personal (duplicate) invoice is issued, it cannot be changed or reissued as a company (triplicate) invoice.
Select "In-store pickup" (free) at checkout. We will notify you by email once your items are ready. Please bring your order information to the store.
Store address: 2F., No. 2-1, Aly. 2, Ln. 244, Sec. 3, Roosevelt Rd., Zhongzheng Dist., Taipei City. Opening hours: Monday to Saturday 11:00 – 18:30 (closed on Sundays).
According to the Consumer Protection Act, online purchases come with a 7-day inspection period starting from the delivery date. Please note that the "inspection period is not a trial period." The purpose is for you to inspect and review the product, not to use it. If you are unsatisfied after inspection, please do not open or use the product and follow the return procedures immediately. Returned products must be in complete packaging with all accessories, gifts, and original packaging intact. Any missing, damaged, or incomplete items may affect your return rights and restoration costs may be deducted.
If you wish to return a product, please ensure it is in complete, new condition with the original packaging undamaged. This includes the product itself, accessories, warranty card, original packaging, and all accompanying documents. If the product is damaged due to reasons attributable to you, we may not be able to process the return, or repair costs may be deducted from the refund. However, products with manufacturing defects are exempt and qualify for unconditional return or exchange.
Please contact us by phone or email within the inspection period, providing the reason for the return/exchange, current product condition, phone number, and pickup address. We will arrange the return within 3-5 business days.
Refund methods and timelines vary by payment method:
Credit Card: After we receive the returned product, the refund will be credited to your credit card account within approximately 5-7 business days. Depending on your billing cycle, the refund may appear on your current or next statement. Please confirm with your credit card issuing bank.
Bank Transfer: Please contact service [at] digilog.tw with your complete bank details (bank name, branch name, bank code, account holder name, account number). We will arrange courier pickup of the returned product and transfer the refund to your designated account within 5-7 business days.
Products come with a 1-year warranty. For repairs during the warranty period, please contact service [at] digilog.tw or call +886-2-23638171.
Round-trip shipping costs for product repairs are the customer's responsibility.
目前尚無評論