ALM ALM030 MCFx2 | DigiLog 聲響實驗室
買器材 » 模組化合成器 » Filter » ALM ALM030 MCFx2
Alm030

ALM ALM030 MCFx2

滿 NT$ 3,000 全台免運費

促銷價 NT$ 8,600

分期資訊:
30 利率,每期 NT$ 2,866
60 利率,每期 NT$ 1,433

商品狀態:有庫存

保固資訊:1 年保固 (不包含: 配件、線材、modular)
滿 NT$ 3,000 全台免運費
付款方式: 7 11 Family mart Hilife Ok Visa Jcb Atm Cash delivery

ALM BUSY CIRCUITS MCFX2

From ALM Busy Circuits comes the MCFx2, a fantastic dual filter module with tons of control, CV inputs, and routing capabilities. The filters are mirror images of each other, based on the original MCF found in ALM's System Coupe—great for blending two filter positions from the same signal, filtering two different signals, or even cross-modulation and feedback for some gnarly pseudo-complex oscillating. Basic controls include a cutoff frequency and resonance knobs, with CV input attenuverter and attentuator respectively, allowing you to shape your timbres over time. MCFx2 also has per-filter 1V/Oct inputs for filter tracking, and since the resonance goes into self-oscillation, you basically can consider MCFx2 as two more synth voices!

Each filter has three outputs that run simultaneously, including a low pass, high pass, and a switchable band pass/notch filter that can be set by a jumper on the back of the unit. These three sonic possibilities are great for utilizing one source in a multitude of ways, and introducing the Feed button allows filter one to be fed into filter two for patchless routing. With synchronized control over both filters via the Link button, ALM's MCFx2 is a fantastic and versatile processor and generator for your modular system.

MCFX2 FEATURES

  • Dual analog filter module
  • Two independent low pass filters with cutoff and resonance controls
  • CV input for cutoff frequency and resonance with attenvertors and attenuators, respectively
  • 1V/Oct tracking inputs for each filter
  • Link button for linked cutoff frequency and Feed button for feeding filter one into filter two
  • Three outputs each including a low pass, high pass, and a band pass/notch (switchable via jumpers on the back)

使用評論:

目前尚無評論

購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定,網路購物享有商品到貨日起算七天猶豫期。必須提醒您,「 猶豫期並非試用期 」,鑑賞期目的為提供您檢視、參考,並非提供您商品的試用,若您收到商品經檢視後有任何不合意之處,請勿拆封使用,並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝,且勿缺漏各項配件及贈品,或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件,可能會引響到您的退換貨權益,也可能依照損毀狀況扣除復原之相關費用。


Q2 . 如何辦理退換貨?

若您確定要辦理退貨,請務必保持商品全新完整包裝,且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等,均須包含在內,勿缺漏任何一項。若有其他可歸責您的原因,造成商品損毀,將無法辦理退貨,或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題,則不在此限,享有無條件退換貨服務。

請於鑑賞期內來電或來信,詳細告知我們欲退換貨之原因、商品現況、電話,及取件的地址,我們將於 3 - 5 個工作天內安拍退貨事宜。


Q3 . 如何收到退款、需要多少時間?

依不同付款方式,退款方式與時間也不同,說明如下:

信用卡付款:帶我們收到退貨商品後約 5 至 7 個工作天,款項將會退至您信用卡帳戶。請依信用卡結帳日判斷,刷退款項可能列於本月或次月帳單,退款進程請向信用卡發卡銀行確認。

匯款:請聯絡 service [at] digilog.tw 並提供您的完整匯款資料(銀行、分行名稱、銀行代號、戶名、帳號),我們將派快遞公司前去取回您的退換貨商品,並於 5 至 7 個工作天,將款項匯還至您所指定的帳戶。


Q4 . 商品維修的運費需要自行負擔嗎?

商品維修的往返運費須自行負擔。

Digilog