Shop » 模組化合成器 » Filter » ACL Dual State Variable VCF
Width 26 HP
Our Dual State Variable Filter is - on the surface - a very simple device, offering two powerful multimode VCFs, each able to operate in lowpass, bandpass, highpass, and notch mode. It really sounds beautiful, with a lovely liquid sound, and plenty of bass 'oomph'. But our design makes it very versatile and powerful too.
At its simplest, it is a perfect mono filter: Ideal for creating incredibly fat kicks and other percussion - or thick basses, pads and leads. But when used as two parallel filters it can be used to apply extraordinary stereo effects to mono signals - from sweeping panoramas to ultra-wide characterful stereo-ising (using carefully applied notch filters on the left and right for example). And used in a serial configuration it yields stunning results, such as formant filtering, for organic vocal-like effects - on anything from pads to drums. Or simply running one 12dB filter into the next, creating a 24dB filter, but with the ability to alter the cutoff, resonance, and more... halfway through the process.
Naturally, the cutoff and resonance controls feature CV inputs, each with an attenuverter. And the individual filter types have their own outputs, all of which can be deployed simultaneously (with some additional options for Notch that are probably best left to the manual to explain!).
Finally, to simplify many (if not most) regular patching situations, all audio and CV inputs are normalised* from filter A to filter B.
In the end, the Dual State Variable VCF delivers everything you would expect and demand from a modular VCF, feature-wise, plus some well thought out routing, and a sound so creamy that you might well consider buying this module even if it was missing valuable features and was terribly designed.
*Automatically patched on the circuit board, unless alternative sources are manually patched in.
使用評論：
購物須知 Q&A
Q1 . 何謂鑑賞期?
依消費者保護法之規定，網路購物享有商品到貨日起算七天猶豫期。必須提醒您，「 猶豫期並非試用期 」，鑑賞期目的為提供您檢視、參考，並非提供您商品的試用，若您收到商品經檢視後有任何不合意之處，請勿拆封使用，並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝，且勿缺漏各項配件及贈品，或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件，可能會引響到您的退換貨權益，也可能依照損毀狀況扣除復原之相關費用。
Q2 . 如何辦理退換貨?
若您確定要辦理退貨，請務必保持商品全新完整包裝，且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等，均須包含在內，勿缺漏任何一項。若有其他可歸責您的原因，造成商品損毀，將無法辦理退貨，或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題，則不在此限，享有無條件退換貨服務。
請於鑑賞期內來電或來信，詳細告知我們欲退換貨之原因、商品現況、電話，及取件的地址，我們將於 3 - 5 個工作天內安拍退貨事宜。
Q3 . 如何收到退款、需要多少時間?
依不同付款方式，退款方式與時間也不同，說明如下：
信用卡付款：帶我們收到退貨商品後約 5 至 7 個工作天，款項將會退至您信用卡帳戶。請依信用卡結帳日判斷，刷退款項可能列於本月或次月帳單，退款進程請向信用卡發卡銀行確認。
匯款：請聯絡 service [at] digilog.tw 並提供您的完整匯款資料（銀行、分行名稱、銀行代號、戶名、帳號），我們將派快遞公司前去取回您的退換貨商品，並於 5 至 7 個工作天，將款項匯還至您所指定的帳戶。
Q4 . 商品維修的運費需要自行負擔嗎?
商品維修的往返運費須自行負擔。
Waht's New
目前尚無評論