Tiptop Audio Stackcable 是一款 3.5mm 模組合成器 CV/訊號線,連接端整合了 3.5mm 插頭與 3.5mm 插孔,可堆疊串接訊號,提供 multiple(分接)功能。








The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you’ll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.
When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively “seals up” a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.
The Stackcable’s elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind-altering your patching will become with our Stackcables.
購物滿 NT$3,000 免運費,未滿 NT$3,000 運費為 NT$120。選擇「門市自取」則不收運費。
我們提供:信用卡(一次付清、3 期、6 期分期)、銀行匯款、超商代碼繳費、貨到付款、到店付款,以及 AFTEE 先享後付。分期付款目前僅提供中國信託、玉山銀行、台新銀行發行之信用卡。軟體商品與金額超過 NT$10,000 之訂單無法使用貨到付款。
發票已全面採用電子發票,將自動寄送至您註冊的 Email。個人(二聯式)發票一經開立,無法更改或改開公司戶(三聯式)發票。
結帳時選擇「門市自取」(免運費),商品備妥後我們會以 Email 通知您,請攜帶訂單資訊前往門市取貨。
門市地址:台北市中正區羅斯福路三段 244 巷 2 弄 2-1 號 2 樓,營業時間:週一至週六 11:00 – 18:30(週日公休)。
依消費者保護法之規定,網路購物享有商品到貨日起算七天猶豫期。必須提醒您,「 猶豫期並非試用期 」,鑑賞期目的為提供您檢視、參考,並非提供您商品的試用,若您收到商品經檢視後有任何不合意之處,請勿拆封使用,並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝,且勿缺漏各項配件及贈品,或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件,可能會影響到您的退換貨權益,也可能依照損毀狀況扣除復原之相關費用。
若您確定要辦理退貨,請務必保持商品全新完整包裝,且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等,均須包含在內,勿缺漏任何一項。若有其他可歸責您的原因,造成商品損毀,將無法辦理退貨,或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題,則不在此限,享有無條件退換貨服務。
請於鑑賞期內來電或來信,詳細告知我們欲退換貨之原因、商品現況、電話,及取件的地址,我們將於 3 - 5 個工作天內安排退貨事宜。
依不同付款方式,退款方式與時間也不同,說明如下:
信用卡付款:待我們收到退貨商品後約 5 至 7 個工作天,款項將會退至您信用卡帳戶。請依信用卡結帳日判斷,刷退款項可能列於本月或次月帳單,退款進程請向信用卡發卡銀行確認。
匯款:請聯絡 service [at] digilog.tw 並提供您的完整匯款資料(銀行、分行名稱、銀行代號、戶名、帳號),我們將派快遞公司前去取回您的退換貨商品,並於 5 至 7 個工作天,將款項匯還至您所指定的帳戶。
商品享有 1 年保固。保固期內如需維修,請來信 service [at] digilog.tw 或來電 02-23638171 與我們聯絡。
商品維修的往返運費須自行負擔。
轉接頭(如 XLR 公轉 mini XLR 母、3.5 轉 6.3)體積小、直接插在器材或線材端子上,適合臨時、單點的規格轉換;轉接線本身就是一條兩端不同接頭的線(如 3.5 轉 RCA、3.5 轉 6.3),適合需要一段距離或固定佈線的場合。臨時救急用轉接頭,長期使用或需要走線就選對應的轉接線更穩定可靠。
3.5mm 是手機與隨身器材常見的迷你端子,6.3mm 用於樂器與專業器材,RCA 多用於消費影音與 DJ 器材,XLR 則是麥克風與平衡連接的卡農頭。不同端子之間可用轉接線互通(例如 3.5 轉 RCA、3.5 轉 6.3、XLR 轉 6.3),但要留意平衡與非平衡、單聲道與立體聲是否對應,選線時以「來源端子 → 目的端子」加上訊號類型一起確認。
Eurorack patch cable 是 3.5mm 單聲道(TS)短線,用來在模組間傳遞音訊與 CV/Gate 控制電壓,和一般立體聲 3.5mm 耳機線(TRS)並不通用。選購時以長度區分用途:短線接相鄰模組、長線(約 60~90cm)跨區佈線,不同顏色則方便辨識訊號流向與整理排線。
這類線材用專業級導體(如 Mogami 2549/2524、Canare)搭配 Neutrik 等高品質接頭手工焊製,屏蔽紮實、訊噪比與耐用度都優於量產廉價線,長期插拔也不易接觸不良。錄音室固定佈線、需要常搬動的現場、或想一次到位的訊號鏈很值得投資;純臨時或訊號要求不高的場合,一般線材也夠用。
DB25 是以一顆 25 針接頭一次傳輸 8 軌類比訊號的規格,常用於錄音介面、多軌前級、Patchbay 與混音器之間的批次連接,一條線取代 8 條 XLR/TRS,大幅減少佈線雜亂。選購時要確認兩端腳位標準(多數專業器材採 Tascam 標準)、公母頭方向,以及對應的是類比而非數位訊號。
目前尚無評論