Home » Keyboard » Synthesizer Keyboard » Behringer POLY D 類比合成器鍵盤

Behringer POLY D 類比合成器鍵盤 - Product Image 1

Behringer POLY D 類比合成器鍵盤

Name: Behringer POLY D 類比合成器鍵盤
Brand: Behringer
Price: 33500 TWD
Availability: OutOfStock

Free shipping orders over NTD 3,000

NT$ 33,500 ~~NT$ 35,000~~

Installment Info: (Details )

3 months 0 interest, per month NT$ 11,167

6 months 0 interest, per month NT$ 5,583

Type

Qty

Status: 無法購買

Payment:

Free 1-year Warranty (except all cable, accessories and modulars) (Details)

Warranty Exclusions: Cables, power adapters and other accessories included in the box, Teenage Engineering Pocket Operator series, Modular synthesizers, Behringer HA400/MX400, MIDI Solutions series, microphone stands, hard cases, pedals and other accessories

This product has been viewed 9381 times

NT$ 33,500

Behreinger Poly D 四發聲類比合成器鍵盤－－開放預購中！

37 全尺寸力度感應鍵盤
四發聲：可切換 mono/unison 以及 poly 模式
四個類比 VCOs 波形： triangular-, sawtooth, pulse waveforms
Noise 處理器：白色及粉色噪音兩種可切換
27 dB 梯形濾波器可調 resonance
Low/high pass 濾波器
2 ADS envelope：VCF、VCA 各1
類比 BBD 雙聲道 chorus 效果
Distortion 整合效果：可控制 tone
序列器：32-step
琶音器
音高/modulation 調變輪
可調整的 panel 直覺的設計
內附 12 VDC 變壓器
平衡雙聲道輸出：2x6.3mm jack 孔
可調整的雙聲道耳機輸出：6.3mm jack
外接音源輸入：6.3mm jack
V-trigger、modulation、pitch-CV、filter & Loudness 輸入/輸出：6.3mm output
Sync 輸入/輸出：6.3mm jack
MIDI in/out/thru
USB-B 連接孔
尺寸：64.7 x8.9 x 36 公分

詳細規格表

發聲器介紹	Number of Voices: 4-Note Polyphony (with Paraphonic Mode) Type: Analog Modes: Mono, Unison, Poly VCO: 4 x Voltage-Controlled Oscillators (0.1 Hz to 20 kHz in 6 Overlapping Ranges) LFO: 1 x Low-Frequency Oscillator (0.05 Hz to 200 Hz, up to 300 Hz with External CV Input) VCF: 1 x Voltage-Controlled Filter, Switchable Low-Pass or High-Pass (24 dB / Octave Slope) Envelopes: VCA, VCF FX: Distortion, Chorus
鍵數	37-Note Full-Sized Keys Synth-Action with Aftertouch
輸入/輸出	Main Output: 2 x 1/4" / 6.35 mm TRS External Input: 1 x 1/4" / 6.35 mm Headphones: 1/4" / 6.35 mm TRS
CV 選項	External Control Inputs: 1/4" / 6.35 mm Loudness Filter Oscillator Mod Source External V-Trigger Internal Control Outputs: 1/4" / 6.35 mm After-Pressure with Scale Knob Pitch V-Trig Velocity with Scale Knob
USB	Type: Class-Compliant USB 2.0 Type-B Supported Operating Systems: Windows XP or Later macOS 10.6.8 or Later
MIDI 接孔	In/Out/Thru: 3 x 5-pin DIN
控制版面	Knobs Tune: -2 to +2 Glide: 0 to 10 Modulation Mix: OSC 4 or Filter EG to Noise/Ext Mod Source or LFO Modulation Wheel Pitch Wheel LFO Rate: 0 to 10 Switches Modulation Source: OSC 4 or Filter EG Modulation Source: Noise/Ext Mod Source or LFO LFO Waveform: Triangular or Square
振盪器	Knobs Range (OSC 1, 2, 3, and 4): LO, 32', 16', 8', 4', 2' Frequency (OSC 2, 3, & 4): -7 to +7 Waveform (OSC 1, 2, 3): Triangular, Sharktooth, Saw, Square, Wide Pulse, Narrow Pulse Waveform (OSC 4): Triangular, Reverse Saw, Saw, Square, Wide Pulse, Narrow Pulse Switches: Oscillator Modulation On/Off OSC 4 Control (By Keyboard) On/Off
Mixer Section	Knobs Volume (OSC 1, 2, 3, 4): 0 to 10 Volume (External Input): 0 to 10 Volume (Noise): 0 to 10 Switches OSC 1, 2, 3, 4: On/Off External Input: On/Off Noise: On/off Noise Source: Pink or White LED: Overload
濾波器	Knobs Cutoff Frequency: -4 to +4 Filter Emphasis: 0 to 10 Amount of Contour: 0 to 10 Attack: 1 ms to 10 s Decay: 4 ms to >35 s Sustain: 0 to 10 Switches Filter Mode: Low-Pass / High-Pass Filter Modulation: On/Off Keyboard Control 1: On (1/3) or Off Keyboard Control 2: On (2/3) or Off
輸出	Knobs Volume: 0 to 10 Headphone Volume: 0 to 10 Attack: 1 ms to 10 s Decay: 4 ms to >35 s Sustain: 0 to 10 Switches Loudness Decay: On/Off LED: Power
效果	Distortion Knobs Dist: 0 to 10 Tone: 0 to 10 Level: 0 to 10 Switch: On/Off Chorus Buttons: I and II Switch: On/Off
序列器 & 琶音器	Arpeggiator: 8 Patterns Sequencer: 32-Steps per Pattern, (8 Banks of 8 Patterns, 64 Total)
電源	External Power Adapter: 12 VDC, 1000 mA

Reviews:

目前尚無評論

Purchase FAQ

Q1. What is the inspection period?

According to the Consumer Protection Act, online purchases come with a 7-day inspection period starting from the delivery date. Please note that the "inspection period is not a trial period." The purpose is for you to inspect and review the product, not to use it. If you are unsatisfied after inspection, please do not open or use the product and follow the return procedures immediately. Returned products must be in complete packaging with all accessories, gifts, and original packaging intact. Any missing, damaged, or incomplete items may affect your return rights and restoration costs may be deducted.

Q2. How do I process a return or exchange?

If you wish to return a product, please ensure it is in complete, new condition with the original packaging undamaged. This includes the product itself, accessories, warranty card, original packaging, and all accompanying documents. If the product is damaged due to reasons attributable to you, we may not be able to process the return, or repair costs may be deducted from the refund. However, products with manufacturing defects are exempt and qualify for unconditional return or exchange.

Please contact us by phone or email within the inspection period, providing the reason for the return/exchange, current product condition, phone number, and pickup address. We will arrange the return within 3-5 business days.

Q3. How will I receive my refund, and how long does it take?

Refund methods and timelines vary by payment method:

Credit Card: After we receive the returned product, the refund will be credited to your credit card account within approximately 5-7 business days. Depending on your billing cycle, the refund may appear on your current or next statement. Please confirm with your credit card issuing bank.

Bank Transfer: Please contact service [at] digilog.tw with your complete bank details (bank name, branch name, bank code, account holder name, account number). We will arrange courier pickup of the returned product and transfer the refund to your designated account within 5-7 business days.