Adam Audio A7V 監聽喇叭 - DigiLog 聲響實驗室
Home » Speaker » Studio Monitor » Adam Audio A7V 監聽喇叭
Adam Audio A7V 監聽喇叭 - Main Image
Adam Audio A7V 監聽喇叭 - Product Image 1
Adam Audio A7V 監聽喇叭 - Product Image 2
Adam Audio A7V 監聽喇叭 - Product Image 3

Adam Audio A7V 監聽喇叭

Free shipping orders over NTD 3,000

Promo Price
NT$  52,900
Installment Info:
3 months 0 interest, per month NT$ 17,633
6 months 0 interest, per month NT$ 8,817
預購商品 (約 10~15 個工作天)
NT$ 52,900
A7V 監聽喇叭 Adam Audio A7V 監聽喇叭 NT$ 52,900

ADAM Audio A7V 主動式 7 吋近場監聽喇叭

ADAM Audio A7V 是 A Series 系列中最具代表性的 7 吋主動監聽喇叭,為經典 A7X 的新世代進化版本。A7V 搭載由多層礦物纖維(Multi‑Layer Mineral, MLM)製成的 7 吋低音單體,與德國手工製 X‑ART 絲膜高音單體,搭配可旋轉設計的 HPS 波導技術,打造頻率響應範圍 40 Hz 至 45 kHz,可呈現深厚低頻與延伸高頻的極致音質平衡。

A7V 內建 DSP 音場校正功能(Bass/Desk/Presence/Treble 4 項調整),並提供 “Pure” 與 “UNR” 兩種聲音校正配置,可彈性因應房間反射、工作桌擺放位置與使用者偏好,在後置機板即可調整,大幅提升聆聽精準度 。此外,也可以透過 A Control 軟體進行 Ethernet 遠端操控,並支援 Sonarworks SoundID Reference 等第三方校正設定匯入,為未來新增濾波及韌體更新預留彈性。

A7V 的低音單體採用由多層礦物纖維燒結而成,兼具輕量與高剛性,可顯著降低不必要的振動與失真,搭配精密磁力系統與 Class D 類比功率放大器,提供高輸出與低失真表現。而高音的 X‑ART 絲膜振膜輕薄反應迅速,加上 Class AB 放大模組推動,增強高頻細節與動態控制。

使用者能選擇橫向或直向擺放,HPS 波導可旋轉 90°,確保高頻擴散的水平一致性與垂直聚焦力,適應縱橫擺位情況。近期媒體與專業人士也讚譽 A7V 是「產業級標準的監聽喇叭」、「物超所值的價格性能比」 。

設備規格上,A7V 峰值功率高達 130 W,最大峰值音壓為 105 dB SPL(IEC 計算達 113 dB),可支援高音量的混音與母帶處理工作。

 

 

產品特色

  • 多層礦物纖維 7 吋低音單體,重量輕、剛性高、振動控制優異

  • 德國手工 X‑ART 絲膜高音單體,搭配可旋轉 HPS 波導,確保高頻擴散穩定

  • 雙段放大設計:低音採 Class D、超高頻採 Class AB,動態與失真控制更優

  • 內建 DSP 房間校正功能,可調節 4 段頻寬響應以適應不同擺位與反射環境

  • 支援 Ethernet 遠端調整與韌體更新,並兼容 A Control 軟體與 Sonarworks 校正設定

  • 頻率響應達 40 Hz – 45 kHz(-6 dB),最大峰值音壓可達 105 dB (113 dB IEC)

  • 頻率交叉點為 2.8 kHz,提供清晰銜接表現

  • 前置雙導向 Bass reflex 設計,避免背部反射影響音質

  • HPS 波導可旋轉 90°,橫置或直置皆保持高頻均衡

  • 機體具備 M8 底部螺牙,可輕鬆安裝於支架或懸臂進行固定

 

詳細規格

  • Display:前面板多色 LED 狀態指示

  • Cabinet Design:前置雙 Bass reflex 孔導向

  • Cabinet Material:MDF 外殼,表面貼皮與烤漆處理

  • Mounting:底部 4 個 M8 螺牙

  • Power consumption:最大 220 W;空載 10 W;睡眠模式 3.5 W

  • AC Input Voltage:100 – 240 V,50/60 Hz

  • Power Rating:最大 300 W

  • Operating Conditions:-10 °C~+40 °C,<75 % RH 無冷凝

  • Weight:8.7 kg

  • Dimensions:33.7 cm(高) × 20.0 cm(寬) × 28.0 cm(深)

Audio Input Connectors

  • 模擬輸入:XLR(平衡)、RCA(非平衡)

  • 輸入阻抗:9 kΩ(平衡)、3.3 kΩ(非平衡)

  • 最大輸入電平:+19 dBu

Amplification

  • Woofer(低音)

    • 放大器型式:PWM Class D

    • 峰值功率:110 W(10 % THD,限幅器關閉)

    • RMS 功率:90 W(1 % THD,限幅器關閉)

  • Tweeter(高音)

    • 放大器型式:Class A/B

    • 峰值功率:20 W(10 % THD,限幅器關閉)

    • RMS 功率:15 W(1 % THD,限幅器關閉)

Control Options via Network

  • Networking Connector:RJ45

  • Communication Protocol:OCA over IP

  • Control Software:A Control(支援 Windows 及 macOS)

  • Room Adaption:機板 + 擴充式校正 + 支援 Sonarworks SoundID Reference 設定匯入

  • Advanced Room Adaption:6 段參數均衡器、等化增益、延遲時間調整

Acoustics

  • 頻率響應(-3 dB):44 Hz – 41 kHz

  • 頻率響應(-6 dB):40 Hz – 45 kHz

  • 分頻點:2.8 kHz

  • 最大峰值音壓(1 m sine burst):105 dB SPL

  • 最大 IEC 加權雜訊峰值:113 dB SPL

  • Dolby DARDT:最高 115 dB SPL(全頻)、119 dB SPL(Bass 管控)

Drivers

  • Woofer:7 吋 MLM 低音錐,音圈直徑 33 mm

  • Tweeter:X‑ART 絲膜高音,振膜面積 2420 mm²(相當於 2″),4:1 速度轉換率

  • 波導擴散角度:120°(水平)、70°(垂直)

Signal Processing

  • AD 轉換器:24‑bit

  • 內部採樣率:96 kHz

  • 延遲範圍/解析度:0–10 ms/0.1 ms

  • 保護機制:獨立峰值及溫控限幅器,獨立驅逐

  • Dolby DARDT 支援

Backplate Controls

  • 輸入靈敏度:0 dBu = 100 dB SPL(1 m,0 dB level)

  • 輸出音量:-12 dB 至 +12 dB

  • 輸入選擇:平衡 XLR 或 非平衡 RCA

  • 聲音配置:Pure(超平坦)、UNR

Room Adaptation 調節選項

  • Bass:+2 / 0 / -2 / -4 dB

  • Desk(桌面):0 / -2 / -4 dB

  • Presence:+1 / 0 / -1 dB

  • Treble:+1.5 / 0 / -1.5 dB

 

Line 好友

保固說明

關於 DigiLog

加入好友

Reviews:

目前尚無評論

Purchase FAQ

Q1. What is the inspection period?

According to the Consumer Protection Act, online purchases come with a 7-day inspection period starting from the delivery date. Please note that the "inspection period is not a trial period." The purpose is for you to inspect and review the product, not to use it. If you are unsatisfied after inspection, please do not open or use the product and follow the return procedures immediately. Returned products must be in complete packaging with all accessories, gifts, and original packaging intact. Any missing, damaged, or incomplete items may affect your return rights and restoration costs may be deducted.


Q2. How do I process a return or exchange?

If you wish to return a product, please ensure it is in complete, new condition with the original packaging undamaged. This includes the product itself, accessories, warranty card, original packaging, and all accompanying documents. If the product is damaged due to reasons attributable to you, we may not be able to process the return, or repair costs may be deducted from the refund. However, products with manufacturing defects are exempt and qualify for unconditional return or exchange.

Please contact us by phone or email within the inspection period, providing the reason for the return/exchange, current product condition, phone number, and pickup address. We will arrange the return within 3-5 business days.


Q3. How will I receive my refund, and how long does it take?

Refund methods and timelines vary by payment method:

Credit Card: After we receive the returned product, the refund will be credited to your credit card account within approximately 5-7 business days. Depending on your billing cycle, the refund may appear on your current or next statement. Please confirm with your credit card issuing bank.

Bank Transfer: Please contact service [at] digilog.tw with your complete bank details (bank name, branch name, bank code, account holder name, account number). We will arrange courier pickup of the returned product and transfer the refund to your designated account within 5-7 business days.


Q4. Do I need to pay for shipping when sending products for repair?

Round-trip shipping costs for product repairs are the customer's responsibility.

You may be interested in: