ALM ALM027 Boss Bow Two | DigiLog 聲響實驗室
Shop » 模組化合成器 » In/Out » ALM ALM027 Boss Bow Two
Alm 0001 %e6%88%aa%e5%9c%96 2021 07 20 %e4%b8%8b%e5%8d%886.06.02

ALM ALM027 Boss Bow Two

Free shipping orders over NTD 3,000

促銷價 NT$ 6,500

Pay installments 3 / 6
30 利率,每期 NT$ 2,166
60 利率,每期 NT$ 1,083

Status: 預購商品 (約 10~15 個工作天)

Free 1-year Warranty (except all cable, accessories and modulars)
Free shipping orders over NTD 3,000
Payment: 7 11 Family mart Hilife Ok Visa Jcb Atm Cash delivery

‘Boss Bow Two’ is an 8 way bidirectional voltage controlled switch with 3 different control modes: address, strobe, and step. Each control mode uniquely routes signals from an input ‘I/O’ to an output ‘I/O’.  Address mode allows for instant routing manually via the offset or external control voltage, step mode sequentially advances I/O following signal at the clock input and the strobe mode combines the two, holding the addressed position until the next clock pulse. 

The reset input allows for master on off switching in address and strobe modes and traditional sequencer style ‘reset’ in step mode. The control input features both an attenuverter and offset to precisely select which of the 8 I/O’s are available to be ‘switched’ in address and strobe modes and sets the direction of travel in step mode.

As it is bidirectional, audio or CV can be routed from 1 of up to 8 inputs to a single output or a single input to 1 of up to 8 outputs. The unique features and flexibility of the ‘BB2’ allow for a wide range of potential patches to be created.

Feature

  • 8 way bidirectional voltage controlled switch
  • 3 unique control modes: address, strobe, and step
  • 1 input into any 1 of up to 8 outputs -or- 1 of up to 8 inputs into a single output
  • Accepts both audio and CV at I/O’s
  • Accepts a variety of control signals, triggers, gates & CV.
  • Attenuverter and offset controls for the CV input
  • Clock and reset inputs
  • Fast switching and reset up to audio rates
  • Skiff friendly
  • Designed and built in England.

Technical Specifications

  • Supply : +12V 40mA / -12V 10mA
  • Size : 8HP
  • Depth : 38mm

DigiLog Line

DigiLog 保固

關於 DigiLog

使用評論:

目前尚無評論

購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定,網路購物享有商品到貨日起算七天猶豫期。必須提醒您,「 猶豫期並非試用期 」,鑑賞期目的為提供您檢視、參考,並非提供您商品的試用,若您收到商品經檢視後有任何不合意之處,請勿拆封使用,並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝,且勿缺漏各項配件及贈品,或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件,可能會引響到您的退換貨權益,也可能依照損毀狀況扣除復原之相關費用。


Q2 . 如何辦理退換貨?

若您確定要辦理退貨,請務必保持商品全新完整包裝,且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等,均須包含在內,勿缺漏任何一項。若有其他可歸責您的原因,造成商品損毀,將無法辦理退貨,或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題,則不在此限,享有無條件退換貨服務。

請於鑑賞期內來電或來信,詳細告知我們欲退換貨之原因、商品現況、電話,及取件的地址,我們將於 3 - 5 個工作天內安拍退貨事宜。


Q3 . 如何收到退款、需要多少時間?

依不同付款方式,退款方式與時間也不同,說明如下:

信用卡付款:帶我們收到退貨商品後約 5 至 7 個工作天,款項將會退至您信用卡帳戶。請依信用卡結帳日判斷,刷退款項可能列於本月或次月帳單,退款進程請向信用卡發卡銀行確認。

匯款:請聯絡 service [at] digilog.tw 並提供您的完整匯款資料(銀行、分行名稱、銀行代號、戶名、帳號),我們將派快遞公司前去取回您的退換貨商品,並於 5 至 7 個工作天,將款項匯還至您所指定的帳戶。


Q4 . 商品維修的運費需要自行負擔嗎?

商品維修的往返運費須自行負擔。

Digilog