SOMA Laboratory WARP 是一款高品質、多用途的數位音訊效果處理器,設計目標並非模擬傳統效果器,而是作為一台能為幾乎所有聲音來源注入「力量與魔法」的聲音塑形工具。無論是原聲樂器、電子合成器、人聲、鼓組,甚至整體混音,WARP 都能在維持音質完整性的前提下,帶來大尺度且具生命力的空間與聲音變化。
WARP 內建 15 種效果演算法,可分為三大類:空間效果(Spatial Effects)、特殊效果(Special Effects) 以及 動態效果與濾波器(Dynamic Effects & Filters)。空間效果涵蓋從傳統 Reverb 到顆粒化、實驗性演算法,並結合 Pitch-shifting、Reverse 與 Micro-loops 等技術。其中多數空間效果支援極長的衰減時間,最長可達「無限延音」,甚至可透過回授比例大於 1 的設定,使演算法進入自我振盪狀態,生成持續演化、層次豐富的聲景。
為了避免聲音在高度生成或自我振盪狀態下失控,所有生成型演算法皆內建 自動音量控制模組,可在保有動態與音色美感的同時,維持合理的 Headroom 與整體音訊穩定性。這使 WARP 不只是實驗工具,也能安全地應用於實際演出與錄音流程。
特殊效果部分包含 Flanger、取樣率/位元深度削減(Sample Rate / Bit Reduction)、復古磁帶模擬等,但這些效果並非單純復刻經典,而是加入 SOMA 特有的非標準參數與行為,讓使用者在熟悉的效果類型中,探索全新的聲音結果。
動態效果與濾波器類別則涵蓋 Compressor、Distortion 與各式 Filter。這一類效果不僅適合單一聲部,也能套用於 Submix(例如節奏組)甚至整體 Mix Bus,因此可被視為 Master Effects 使用。與 SOMA 一貫風格相同,這些效果同樣具備延伸功能與非典型反應,能在傳統混音用途之外,發展出更多聲音可能性。
在音質層面,WARP 採用頂級音訊鏈路與 AD/DA Converter,其等級與 APOGEE、FOCUSRITE、LEXICON、ECHOAUDIO、LINE 6、NOVATION 等專業音訊介面所使用的架構相同,即使用於處理完整立體聲混音,也能避免音質劣化。WARP 提供立體聲輸入與輸出,支援平衡與非平衡連接,所有音訊處理(包含 MIX 控制)皆為全數位處理。AD/DA 解析度為 24bit / 48kHz,內部運算解析度為 32bit IEEE。
操作介面設計直覺且即時,所有功能皆可直接存取,非常適合現場演出使用。更重要的是,每一個處理參數都具備獨立的 CV 輸入,可與 Eurorack 系統或任何 CV 訊號來源整合,使 WARP 成為模組化系統與桌上型音訊設備之間的強力橋樑。
產品特色
內建 15 種數位音訊效果,涵蓋空間、特殊與動態處理
多數空間效果支援極長衰減時間,最長可達無限延音
回授比例可超過 1,支援自我振盪與生成式聲景
生成型演算法內建自動音量控制,維持 Headroom 與音色平衡
特殊效果加入 SOMA 風格的非標準參數與行為設計
動態效果與濾波器可作為 Submix 或 Master Effects 使用
頂級 AD/DA 音訊鏈路,適合處理完整立體聲混音
立體聲輸入/輸出,支援平衡與非平衡連接
全數位音訊處理,包含 MIX 控制
每一參數皆具備獨立 CV 輸入,完整支援 Eurorack 整合
直覺、即時的操作介面,適合現場演出與即時聲音塑形
詳細規格
演算法數量:15
最小輸入電壓:0.35 V peak-to-peak
最大輸入電壓:8.3 V peak-to-peak
輸入阻抗:50 KOhm
輸出阻抗:1000 Ohm
CV 標稱範圍:0–5 V
CV 輸入阻抗:50 KOhm
取樣率/位元深度:48 kHz / 24 bit
內部處理解析度:32 bit IEEE
頻率響應範圍:10 – 22,000 Hz
電源電壓:DC 12V
電源極性:Center positive
電流需求:0.25 A
尺寸:22 × 17 × 7 cm
重量(不含電源與包裝):1.5 kg
電源注意事項:
僅可使用隨附之電源供應器。如需更換,請使用高品質切換式電源供應器,輸出 DC 12V、中心正極、輸出電流 0.3 A 以上,並支援 100–240 V AC 寬電壓輸入。請勿使用未穩壓之變壓器型電源,否則可能造成設備損壞,且不在保固範圍內。
According to the Consumer Protection Act, online purchases come with a 7-day inspection period starting from the delivery date. Please note that the "inspection period is not a trial period." The purpose is for you to inspect and review the product, not to use it. If you are unsatisfied after inspection, please do not open or use the product and follow the return procedures immediately. Returned products must be in complete packaging with all accessories, gifts, and original packaging intact. Any missing, damaged, or incomplete items may affect your return rights and restoration costs may be deducted.
If you wish to return a product, please ensure it is in complete, new condition with the original packaging undamaged. This includes the product itself, accessories, warranty card, original packaging, and all accompanying documents. If the product is damaged due to reasons attributable to you, we may not be able to process the return, or repair costs may be deducted from the refund. However, products with manufacturing defects are exempt and qualify for unconditional return or exchange.
Please contact us by phone or email within the inspection period, providing the reason for the return/exchange, current product condition, phone number, and pickup address. We will arrange the return within 3-5 business days.
Refund methods and timelines vary by payment method:
Credit Card: After we receive the returned product, the refund will be credited to your credit card account within approximately 5-7 business days. Depending on your billing cycle, the refund may appear on your current or next statement. Please confirm with your credit card issuing bank.
Bank Transfer: Please contact service [at] digilog.tw with your complete bank details (bank name, branch name, bank code, account holder name, account number). We will arrange courier pickup of the returned product and transfer the refund to your designated account within 5-7 business days.
Round-trip shipping costs for product repairs are the customer's responsibility.
目前尚無評論