Shop » 模組化合成器 » VCO » Erica Synths Fusion VCO V2
Fusion VCO2 is a full analogue sound source with lots of distinct features.
Features
- Full analogue design
- Great tracking over 8 octave range
- Detune function for thickening the sound
- -1 oct transistor based suboscillator
- Tube overdrive circuit
- External audio input
- VCO synchronization
- Simultaneous waveform outputs
The core of the module is highly stable AS3340-based VCO with three simultaneously available waveforms, transistor-based suboscillator and detune function – two BBD delay lines that make frequency shifter that is mixed back to the principal oscillator in order to emulate two detuned VCOs. Tube crunch – distinct tube overdrive - is added on the top of the mix. Furthermore, Audio input mixes an external audio signal with the principal oscillator which results in crazy sonic experience. Fusion VCO2 is exactly what you need, if you wish to get really low frequencies and have a sound that sets your modular system apart from mass!
The Erica Synths Fusion VCO 2 offers a very wide range of sounds. If you simply need an oscillator without the specific tube sound, you have access to it via the triangle and pulse outputs. The Erica Synths Fusion VCO 2 is not a standard oscillator, but thanks to the two tube stages, it is in itself a module capable of diverse sound shaping. If you are looking for warm, fat or even heavily distorted sounds, you should definitely take a look at the Fusion VCO 2, because there is hardly any analogue oscillator available that offers so much of its own sound character and works both for long sustained and percussive sounds.
Without question it is worth it in terms of both sound, functional possibilities and processing - Pro Audio
| Audio input level | 10Vptp |
| Audio output level | 10Vptp |
| VCO range | C0-C8 and more |
| PWM CV range (full span) | -5V - +5V |
| Panel width | 14 HP |
| Module depth | 42 mm |
| Power consumption | 228mA @+12V, 55mA @-12V |
使用評論：
購物須知 Q&A
Q1 . 何謂鑑賞期?
依消費者保護法之規定，網路購物享有商品到貨日起算七天猶豫期。必須提醒您，「 猶豫期並非試用期 」，鑑賞期目的為提供您檢視、參考，並非提供您商品的試用，若您收到商品經檢視後有任何不合意之處，請勿拆封使用，並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝，且勿缺漏各項配件及贈品，或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件，可能會引響到您的退換貨權益，也可能依照損毀狀況扣除復原之相關費用。
Q2 . 如何辦理退換貨?
若您確定要辦理退貨，請務必保持商品全新完整包裝，且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等，均須包含在內，勿缺漏任何一項。若有其他可歸責您的原因，造成商品損毀，將無法辦理退貨，或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題，則不在此限，享有無條件退換貨服務。
請於鑑賞期內來電或來信，詳細告知我們欲退換貨之原因、商品現況、電話，及取件的地址，我們將於 3 - 5 個工作天內安拍退貨事宜。
Q3 . 如何收到退款、需要多少時間?
依不同付款方式，退款方式與時間也不同，說明如下：
信用卡付款：帶我們收到退貨商品後約 5 至 7 個工作天，款項將會退至您信用卡帳戶。請依信用卡結帳日判斷，刷退款項可能列於本月或次月帳單，退款進程請向信用卡發卡銀行確認。
匯款：請聯絡 service [at] digilog.tw 並提供您的完整匯款資料（銀行、分行名稱、銀行代號、戶名、帳號），我們將派快遞公司前去取回您的退換貨商品，並於 5 至 7 個工作天，將款項匯還至您所指定的帳戶。
Q4 . 商品維修的運費需要自行負擔嗎?
商品維修的往返運費須自行負擔。
Waht's New
目前尚無評論