先前 Pro 1 及 Pro 2 推出時都成為當時期的登峰造極之作。如今進入第三代 Pro 3,2 類比經典 VCO 再加上 wavetable mono/paraphonic synth,可說是無可匹敵。
Pro 3 帶有三個震盪器、三個經典濾波器、三個 LFO、四個帶 Loop 功能封波、一個 32-slot mod matrix 和 16 x 16 x 4 序列。加上雙數位效果及四個可電壓控制輸入輸出,獲得這般強大的樂器是如此讓人興奮之事。
Pro 結合了 Old-School 類比合成器以及多變化數位科技。其中兩個電壓控制振盪器帶來溫暖的聲音,第三個振盪器則是提供了數位音色。藉由 32 Tables x 16 Waves ,可生成無限的音調可能性。

產品特色
Filter 1 :4-pole low-pass ,基底為 Prophet -6
Filter 2 :經典電晶體 ladder filter 及選擇性 Resonance
Filter 3:經典 2-pole 、多變化設計。可在 LP , Notch, HP 之中連續變化
Pro 3 之中最實用的演出共能就是其序列機。 16 Tracks, 16 Steps 和 4 Phrases。即時的 Step Input、Ratcheting、 多變的 Gate 以及序列長度、多種 Playback 模式以及 Paraphonic。處此之外,也可以 Syncs 至 MIDI Clock 及額外聲音輸入。
Pro 三帶有彈性的構造開啟了與外部音訊的大門,透過機身背部 4 個 CV 輸入/輸出和一精緻 Gate 輸出即可與模組化合成器連結。 許多參數都可以藉由 CV 輸出傳送,像是振盪器、LFO、封波及序列機軌術都可以。使的 Pro 3 可以成為 Setup 中的中樞神經。
Pro 3 設計為一個超強大功能的 Monosynth,但它同時也是 3-voice Paraphonic synth。讓 3-note Chords 可以添加許多效果,並且各自振盪器變調。


詳細規格
Two analog, voltage-controlled oscillators
One DSP-based digital oscillator
Analog oscillators produce three classic wave shapes: (triangle, saw, pulse) with variable shape modulation/pulse width on each
Digital oscillator produce 32 digital wavetables of 16 waves each with wave morphing, plus classic wave shapes (sine, triangle, saw, variable-width pulse) and super saw
Digital oscillator 3 can function as an LFO for complex wavetable-based modulation
White noise generator
Hard sync, per-oscillator Glide, Oscillator Slop
3-voice paraphonic mode with individually-gated envelopes per oscillator
Three classic filter types
Filter 1 is a 4-pole, 24 dB per-octave, Prophet-6™ low-pass filter
Filter 2 is a classic, 4-pole, 24 dB per-octave, transistor ladder filter with optional resonance compensation
Filter 3 is a 2-pole, 12 db per-octave, OB-6™ state-variable filter. It can be continuously varied between low-pass, notch, and high-pass operation, with an optional band-pass mode.
Three syncable LFOs with phase offset and slew per LFO
Five waveshapes: triangle, saw, reverse saw, square, and S&H
Four ADSR envelopes with delay (Filter, VCA, and two Auxiliary envelopes)
Envelopes freely assignable to multiple modulation destinations
All envelopes can repeat/loop
Dual digital effects
Stereo delay, BBD delay, chorus, flanger, phaser, ring mod, vintage rotating speaker, distortion, high-pass filter, super plate reverb
Tuned feedback with Grunge for extra-aggressive tonal destruction
Programmable analog distortion
32 slot modulation matrix with over 46 mod sources and over 171 mod destinations
Modulation assignment buttons enable quick and easy modulation routing
Mod Matrix runs at audio rates
Four control voltage (CV) inputs and outputs for interfacing with modular synths and other CV-compatible devices
Parameters that can be sent to CV outputs include oscillators, LFOs, envelopes, sequencer tracks and any other source within the modulation matrix. Runs at audio rates.
Gate Out for triggering external CV-compatible devices. Any CV in can be used as a gate input.
Advanced sequencer with three modes: normal, gated, and trigger
16 tracks and 4 linkable 16-step phrases
Per-step ratcheting, duration, and velocity
Multiple playback modes: forward, reverse, forward/reverse, random
Supports real-time/step input, rests, and variable-length sequences
Syncs to MIDI clock and external audio and CV input
Sequences freely assignable to any modulation destination
Sophisticated arpeggiator with up, down, up+down, random, assign modes
Syncs to MIDI clock and external audio and CV inputs
Re-latching arpeggiation
Runs concurrent with Sequencer for arpeggiated patterns with parameter automation
Over 60 knobs and 70 buttons enable deep, comprehensive editing with minimal menu diving
Backlit pitch and mod wheels are easily visible in low-light situations and have a smooth, precise response.
Independently adjustable upper and lower pitch wheel range
Position-sensitive latchable touch slider for enhanced interactivity and control
Full-sized, three-octave, semi-weighted keyboard with velocity and aftertouch
512 user and 512 factory programs
Playlist mode for generating easily accessible set lists of your favorite programs
1 MIDI In, 1 MIDI Out, and 1 MIDI Thru/Out 2 port
USB port for bidirectional MIDI communication
4 CV inputs (4 x 1/8″ jack) with -10v to +10v voltage range
4 CV outputs (4 x 1/8″ jack) with -10v to +10v voltage range
1 Gate Out (1/8″ jack)
1 Sustain/footswitch input
1 Expression pedal input
1 External audio input (1/4″ phone jack)
Main stereo output (2 x 1/4″ phone jack)
Headphone out (stereo 1/4″ phone jack)
1 universal IEC AC power inlet for internal power supply
Operates worldwide on voltages between 100-240v, 50-60Hz, 30 watts maximum power consumption
Premium, 3-octave, semi-weighted Fatar keyboard
27″ L x 14.5″ W x 5.2″ H (68.5 cm x 36.8 cm x 13.1 cm)
Weight: 27 lbs (12.25 kg)
Multi-angle tilt-up panel
Premium-grade walnut trim
According to the Consumer Protection Act, online purchases come with a 7-day inspection period starting from the delivery date. Please note that the "inspection period is not a trial period." The purpose is for you to inspect and review the product, not to use it. If you are unsatisfied after inspection, please do not open or use the product and follow the return procedures immediately. Returned products must be in complete packaging with all accessories, gifts, and original packaging intact. Any missing, damaged, or incomplete items may affect your return rights and restoration costs may be deducted.
If you wish to return a product, please ensure it is in complete, new condition with the original packaging undamaged. This includes the product itself, accessories, warranty card, original packaging, and all accompanying documents. If the product is damaged due to reasons attributable to you, we may not be able to process the return, or repair costs may be deducted from the refund. However, products with manufacturing defects are exempt and qualify for unconditional return or exchange.
Please contact us by phone or email within the inspection period, providing the reason for the return/exchange, current product condition, phone number, and pickup address. We will arrange the return within 3-5 business days.
Refund methods and timelines vary by payment method:
Credit Card: After we receive the returned product, the refund will be credited to your credit card account within approximately 5-7 business days. Depending on your billing cycle, the refund may appear on your current or next statement. Please confirm with your credit card issuing bank.
Bank Transfer: Please contact service [at] digilog.tw with your complete bank details (bank name, branch name, bank code, account holder name, account number). We will arrange courier pickup of the returned product and transfer the refund to your designated account within 5-7 business days.
Round-trip shipping costs for product repairs are the customer's responsibility.
目前尚無評論