買器材 » 模組化合成器 » VCO » Vermona uniCYCLE
Audio-oscillators are probably the most widespread modules in eurorack-systems. They are fundamental for generating synthetic sounds, tonal as well as percussive ones.
Oscillator-circuits are used in our VERMONA synthesizers, we know how to design them. But instead of copy and paste, we reworked many aspects when adapting our circuits for modular purpose. What is great for closed systems might not always be perfect for modular systems.
All that development work resulted in uniCYCLE: compact, high-performant and stable.
Simple interface and quality without compromises
When designing an audio-oscillator we took great care to make it suitable for musical context. Beside excellent sound quality this also means rock-solid tuning stability. uniCYCLE more than fulfills these requirements. It easily covers a huge tuning-range while strictly following the 1-volt-per-octave-convention.
With one knob you can master uniCYCLE’s frequencies in three different modes. TUNE either controls the low-frequency or audio range or adds respectively subtracts, exactly one octave. In this calibrated mode it provides a dead-zone around its center-position. Thus it’s easy to access all three octaves without the need of a center-click.
With only 10 HP in width, uniCYCLE offers all the common features that you might expect: inputs for hard- and soft-sync as well as exponential and linear frequency modulation.
Even more than standard waves
uniCYCLE offers six waveform outputs. Beside the classic sawtooth, triangleand square it generates sine, even and a special sawtooth with doubled frequency. PWM is not only available for square. Even - a shape the only has even-numbered harmonics - can be transformed to a sine-like wave whereas the doubled saw turns into half-pitched triangles.
uniCYCLE is a strong base for each eurorack-system. At least one should be in every case.
| Levels | |
| waveform output levels | ±5 volts |
| optimal CV-input levels | ±5 volts |
| Maximum Power Consumption | |
| +12 volts | 70 mA |
| –12 volts | 60 mA |
| +5 volts | - |
| Dimensions and Weight | |
| Width / Height | 10 HP (129.00 mm) / 3 U |
| Depth | 45 mm |
| Weight | 160 g |
使用評論：
購物須知 Q&A
Q1 . 何謂鑑賞期?
依消費者保護法之規定，網路購物享有商品到貨日起算七天猶豫期。必須提醒您，「 猶豫期並非試用期 」，鑑賞期目的為提供您檢視、參考，並非提供您商品的試用，若您收到商品經檢視後有任何不合意之處，請勿拆封使用，並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝，且勿缺漏各項配件及贈品，或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件，可能會引響到您的退換貨權益，也可能依照損毀狀況扣除復原之相關費用。
Q2 . 如何辦理退換貨?
若您確定要辦理退貨，請務必保持商品全新完整包裝，且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等，均須包含在內，勿缺漏任何一項。若有其他可歸責您的原因，造成商品損毀，將無法辦理退貨，或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題，則不在此限，享有無條件退換貨服務。
請於鑑賞期內來電或來信，詳細告知我們欲退換貨之原因、商品現況、電話，及取件的地址，我們將於 3 - 5 個工作天內安拍退貨事宜。
Q3 . 如何收到退款、需要多少時間?
依不同付款方式，退款方式與時間也不同，說明如下：
信用卡付款：帶我們收到退貨商品後約 5 至 7 個工作天，款項將會退至您信用卡帳戶。請依信用卡結帳日判斷，刷退款項可能列於本月或次月帳單，退款進程請向信用卡發卡銀行確認。
匯款：請聯絡 service [at] digilog.tw 並提供您的完整匯款資料（銀行、分行名稱、銀行代號、戶名、帳號），我們將派快遞公司前去取回您的退換貨商品，並於 5 至 7 個工作天，將款項匯還至您所指定的帳戶。
Q4 . 商品維修的運費需要自行負擔嗎?
商品維修的往返運費須自行負擔。
最新器材
目前尚無評論