首頁 » 模組化合成器 » Clocking » Doepfer [已停售] A-160-2 Clock/Trigger Divider II

Doepfer [已停售] A-160-2 Clock/Trigger Divider II

Name: Doepfer [已停售] A-160-2 Clock/Trigger Divider II
Brand: Doepfer
Price: 3990 TWD
Availability: OutOfStock

滿 NT$ 3,000 全台免運費

NT$ 3,990

購買可獲得 39 點回饋

分期資訊： (明細 )

3 期 0 利率，每期 NT$ 1,330

6 期 0 利率，每期 NT$ 665

類型

數量

商品狀態無法購買

付款方式：

保固資訊：1 年保固 (不包含: 配件、線材、modular) (詳細說明)

保固不包含範圍： 商品內附的線材、變壓器等配件、Teenage Engineering Pocket Operater 系列、Modular 模組合成器、Behringer HA400/MX400、MIDI Solution 系列、麥克風支架、硬盒、踏板等配件

此商品被關注 5314 次

NT$ 3,990

Module A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface. At the outputs, you have access to three sets of seven different sub-divided clock signals, from half the clock frequency down to 1/128. The low/high levels of the output signals are 0V and about +10V.
The A-160-2 also has a reset input. Whenever a reset signal is sensed, all outputs are set to certain levels which depend upon the selected mode.

These are the most important features of the module:

Three different sets of dividing factors, selected by a three-position switch at the front panel:
- power of two: 2, 4, 8, 16, 32, 64, 128
- prime numbers: 2, 3, 5, 7, 11, 13, 17
- integer: 2, 3, 4, 5, 6, 7, 8

Two output modes, selected by a two-position switch at the front panel:
- Gate mode: outputs act like the outputs of typical binary dividers
- Trigger mode: in this mode the outputs are AND-wired with the clock signal (i.e. the clock pulsewidth affects the pulsewidth of the outputs)
- (the center position labelled "Cst" has no meaning so far, please refer to the note at the bottom of the page)
Clock edge type selected by a jumper on the pc board:
- positive: the rising edge of the clock signal triggers the state change of the outputs
- negative: the falling edge of the clock signal triggers the state change of the outputs
Reset behaviour by two jumpers on the pc board:
- level triggered: the level at the Reset input triggers the Reset
- edge triggered: the edge of the signal at the Reset input triggers the Reset
- positive: a high level (> 2.5V) or the rising edge at the Reset input triggers the Reset
- negative: a low level (< 1 V) or the falling edge at the Reset input triggers the Reset

Output polarity selected by a jumper on the pc board:
- positive: non-inverted outputs
- negative: all seven outputs are inverted

使用評論：

目前尚無評論

購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定，網路購物享有商品到貨日起算七天猶豫期。必須提醒您，「猶豫期並非試用期」，鑑賞期目的為提供您檢視、參考，並非提供您商品的試用，若您收到商品經檢視後有任何不合意之處，請勿拆封使用，並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝，且勿缺漏各項配件及贈品，或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件，可能會影響到您的退換貨權益，也可能依照損毀狀況扣除復原之相關費用。