Sequential (Dave Smith) Pro3 SE 合成器鍵盤 (特別版) | DigiLog 聲響實驗室
買器材 » 鍵盤 » 合成器鍵盤 » Sequential (Dave Smith) Pro3 SE 合成器鍵盤 (特別版)
Pro3 se
Pro3 se

Sequential (Dave Smith) Pro3 SE 合成器鍵盤 (特別版)

滿 NT$ 3,000 全台免運費

促銷價 NT$ 999,999

分期資訊:
30 利率,每期 NT$ 333,333
60 利率,每期 NT$ 166,666

商品狀態:無法購買

保固資訊:1 年保固 (不包含: 配件、線材、modular)
滿 NT$ 3,000 全台免運費
付款方式: 7 11 Family mart Hilife Ok Visa Jcb Atm Cash delivery
加入慾望清單
已加入慾望清單

Watched 此商品被關注 5209 次

經典傳奇第三代

先前 Pro 1 及 Pro 2 推出時都成為當時期的登峰造極之作。如今進入第三代 Pro 3,2 類比經典 VCO 再加上 wavetable mono/paraphonic synth,可說是無可匹敵。

Pro 3 帶有三個震盪器、三個經典濾波器、三個 LFO、四個帶 Loop 功能封波、一個 32-slot mod matrix 和 16 x 16 x 4 序列。加上雙數位效果及四個可電壓控制輸入輸出,獲得這般強大的樂器是如此讓人興奮之事。

Pro 結合了 Old-School 類比合成器以及多變化數位科技。其中兩個電壓控制振盪器帶來溫暖的聲音,第三個振盪器則是提供了數位音色。藉由 32 Tables x 16 Waves ,可生成無限的音調可能性。

 

產品特色

  • 以經典設計為基礎的三個濾波器

Filter 1 :4-pole low-pass ,基底為 Prophet -6

Filter 2 :經典電晶體 ladder filter 及選擇性 Resonance

Filter 3:經典 2-pole 、多變化設計。可在 LP , Notch, HP 之中連續變化

  • 豐富情緒序列功能

Pro 3 之中最實用的演出共能就是其序列機。 16 Tracks, 16 Steps 和 4 Phrases。即時的 Step Input、Ratcheting、 多變的 Gate 以及序列長度、多種 Playback 模式以及 Paraphonic。處此之外,也可以 Syncs 至 MIDI Clock 及額外聲音輸入。

  • 與模組化合成器共樂

Pro 三帶有彈性的構造開啟了與外部音訊的大門,透過機身背部 4 個 CV 輸入/輸出和一精緻 Gate 輸出即可與模組化合成器連結。 許多參數都可以藉由 CV 輸出傳送,像是振盪器、LFO、封波及序列機軌術都可以。使的 Pro 3 可以成為 Setup 中的中樞神經。

  • Monophonic 及 Paraphonic 

Pro 3 設計為一個超強大功能的 Monosynth,但它同時也是 3-voice Paraphonic synth。讓 3-note Chords 可以添加許多效果,並且各自振盪器變調。

 

 

詳細規格

  • 3 OSCILLATORS

Two analog, voltage-controlled oscillators

One DSP-based digital oscillator

Analog oscillators produce three classic wave shapes: (triangle, saw, pulse) with variable shape modulation/pulse width on each

Digital oscillator produce 32 digital wavetables of 16 waves each with wave morphing, plus classic wave shapes (sine, triangle, saw, variable-width pulse) and super saw

Digital oscillator 3 can function as an LFO for complex wavetable-based modulation

White noise generator

Hard sync, per-oscillator Glide, Oscillator Slop

  • 3-VOICE PARAPHONIC PLAYABILITY

3-voice paraphonic mode with individually-gated envelopes per oscillator

  • 3 FILTERS

Three classic filter types

Filter 1 is a 4-pole, 24 dB per-octave, Prophet-6™ low-pass filter

Filter 2 is a classic, 4-pole, 24 dB per-octave, transistor ladder filter with optional resonance compensation

Filter 3 is a 2-pole, 12 db per-octave, OB-6™ state-variable filter. It can be continuously varied between low-pass, notch, and high-pass operation, with an optional band-pass mode.

  • 3 LFOS

Three syncable LFOs with phase offset and slew per LFO

Five waveshapes: triangle, saw, reverse saw, square, and S&H

  • 4 ENVELOPES

Four ADSR envelopes with delay (Filter, VCA, and two Auxiliary envelopes)

Envelopes freely assignable to multiple modulation destinations

All envelopes can repeat/loop

  • DIGITAL EFFECTS

Dual digital effects

Stereo delay, BBD delay, chorus, flanger, phaser, ring mod, vintage rotating speaker, distortion, high-pass filter, super plate reverb

  • FEEDBACK AND DISTORTION

Tuned feedback with Grunge for extra-aggressive tonal destruction

Programmable analog distortion

  • 32-SLOT MODULATION MATRIX

32 slot modulation matrix with over 46 mod sources and over 171 mod destinations

Modulation assignment buttons enable quick and easy modulation routing

Mod Matrix runs at audio rates

  • 4 CONTROL VOLTAGE INS & OUTS AND GATE OUT

Four control voltage (CV) inputs and outputs for interfacing with modular synths and other CV-compatible devices

Parameters that can be sent to CV outputs include oscillators, LFOs, envelopes, sequencer tracks and any other source within the modulation matrix. Runs at audio rates.

Gate Out for triggering external CV-compatible devices. Any CV in can be used as a gate input.

  • 16-TRACK SEQUENCER

Advanced sequencer with three modes: normal, gated, and trigger

16 tracks and 4 linkable 16-step phrases

Per-step ratcheting, duration, and velocity

Multiple playback modes: forward, reverse, forward/reverse, random

Supports real-time/step input, rests, and variable-length sequences

Syncs to MIDI clock and external audio and CV input

Sequences freely assignable to any modulation destination

  • ARPEGGIATOR

Sophisticated arpeggiator with up, down, up+down, random, assign modes

Syncs to MIDI clock and external audio and CV inputs

Re-latching arpeggiation

Runs concurrent with Sequencer for arpeggiated patterns with parameter automation

  • CONTROLS

Over 60 knobs and 70 buttons enable deep, comprehensive editing with minimal menu diving

Backlit pitch and mod wheels are easily visible in low-light situations and have a smooth, precise response.

Independently adjustable upper and lower pitch wheel range

Position-sensitive latchable touch slider for enhanced interactivity and control

Full-sized, three-octave, semi-weighted keyboard with velocity and aftertouch

  • MEMORY

512 user and 512 factory programs

Playlist mode for generating easily accessible set lists of your favorite programs

  • IN/OUT

1 MIDI In, 1 MIDI Out, and 1 MIDI Thru/Out 2 port

USB port for bidirectional MIDI communication

4 CV inputs (4 x 1/8″ jack) with -10v to +10v voltage range

4 CV outputs (4 x 1/8″ jack) with -10v to +10v voltage range

1 Gate Out  (1/8″ jack)

1 Sustain/footswitch input

1 Expression pedal input

1 External audio input  (1/4″ phone jack)

Main stereo output (2 x 1/4″ phone jack)

Headphone out (stereo 1/4″ phone jack)

  • POWER

1 universal IEC AC power inlet for internal power supply

Operates worldwide on voltages between 100-240v, 50-60Hz, 30 watts maximum power consumption

  • PHYSICAL SPECS

Premium, 3-octave, semi-weighted Fatar keyboard

27″ L x 14.5″ W x 5.2″ H (68.5 cm x 36.8 cm x 13.1 cm)

Weight: 27 lbs (12.25 kg)

Multi-angle tilt-up panel

Premium-grade walnut trim

DigiLog Line

DigiLog 保固

關於 DigiLog

使用評論:

目前尚無評論

購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定,網路購物享有商品到貨日起算七天猶豫期。必須提醒您,「 猶豫期並非試用期 」,鑑賞期目的為提供您檢視、參考,並非提供您商品的試用,若您收到商品經檢視後有任何不合意之處,請勿拆封使用,並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝,且勿缺漏各項配件及贈品,或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件,可能會引響到您的退換貨權益,也可能依照損毀狀況扣除復原之相關費用。


Q2 . 如何辦理退換貨?

若您確定要辦理退貨,請務必保持商品全新完整包裝,且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等,均須包含在內,勿缺漏任何一項。若有其他可歸責您的原因,造成商品損毀,將無法辦理退貨,或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題,則不在此限,享有無條件退換貨服務。

請於鑑賞期內來電或來信,詳細告知我們欲退換貨之原因、商品現況、電話,及取件的地址,我們將於 3 - 5 個工作天內安拍退貨事宜。


Q3 . 如何收到退款、需要多少時間?

依不同付款方式,退款方式與時間也不同,說明如下:

信用卡付款:帶我們收到退貨商品後約 5 至 7 個工作天,款項將會退至您信用卡帳戶。請依信用卡結帳日判斷,刷退款項可能列於本月或次月帳單,退款進程請向信用卡發卡銀行確認。

匯款:請聯絡 service [at] digilog.tw 並提供您的完整匯款資料(銀行、分行名稱、銀行代號、戶名、帳號),我們將派快遞公司前去取回您的退換貨商品,並於 5 至 7 個工作天,將款項匯還至您所指定的帳戶。


Q4 . 商品維修的運費需要自行負擔嗎?

商品維修的往返運費須自行負擔。

Digilog