QSC RMX1450a Low-Z 擴大機

1

MV7 Podcast 動圈式麥克風 / ...

2

DT 770 PRO 監聽耳機 DT770

3

Eris E5XT 監聽喇叭（一對）

4

MDR-CD900ST 全罩式監聽耳機 C...

5

ISO-155 喇叭架

6

SSL2 USB錄音介面 SSL 2

Shop » 喇叭 » PA擴大機 » QSC RMX1450a Low-Z 擴大機

詳細價格請私訊 DigiLog 粉專或是 Line ID: @nmm9009t

The 500 watts per channel 4Ω QSC RMX1450a Low-Z Power Amplifier is a 2RU rack mountable amplifier designed for live sound reinforcement applications. The amplifier features two Class AB output channels that can operate in either stereo or mono bridge mode. The unit operates on a standard 15 amp plug and utilizes high-current toroidal transformers for less noise and better performance when pushing a 2 ohm load. To reduce distortion, the amplifier utilizes independent user-defeatable clip limiters and includes LED indicator lights to show the presence of the signal and when the signal is clipping.

The chassis of the amplifier is designed with front to rear cooling vents and includes selectable low-frequency filters at 30 Hz and 50 Hz to protect speakers from bottoming out and improve headroom when driving mid and high frequencies. The front panel of the unit features two gain control knobs for easy access and each channel is protected by a dedicated DC and thermal overload protection circuit. For inputs, the back of the unit accepts both balanced 1/4" and XLR inputs. For outputs, the unit features both Neutrik Speakon and touch-proof binding post connections.

Power Rating	Stereo mode (both channels driven) 8 Ω FTC 20 to 20,000 Hz at 0.1% THD: 260 W 8 Ω EIA 1,000 Hz at 0.1% THD: 300 W 4 Ω FTC 20 to 20,000 Hz at 0.1% THD: 400 W 4 Ω EIA 1,000 Hz at 0.1% THD: 500 W (0.5% THD) 2 Ω EIA 1,000 Hz at 0.1% THD: 700 W Bridge-mono mode 8 Ω FTC 20 to 20,000 Hz at 0.1% THD: 800 W Bridge-mono mode 8 Ω EIA 1,000 Hz at 0.1% THD: 900 W Bridge-mono mode 4 Ω EIA 1,000 Hz at 0.1% THD: 1400 W
Signal-to-Noise Ratio	> -100 dB
Distortion	SMPTE-IM: < 0.01% For 8 and 4 Ω load THD for 20 to 20,000 Hz at 10 dB below rated power: less than 0.03% THD for 1,000 Hz at full rated power: less than 0.03%
Input Sensitivity	1.15 V (+3.4 dBU) at 8 Ω
Voltage Gain	40x (32 dB)
Circuit Type	Class AB
Power Consumption	6.0 A 1/8 power pink noise at 4Ω 9.6 A
Damping Factor	> 300 at 8Ω
Input Impedance	10 kΩ balanced 20 kΩ unbalanced
Frequency Response	20 to 20,000 Hz +0/-1 dB -3 dB points 5 Hz to 50,000 Hz (LF filter bypassed/8 Ω)
Input Connections	Active balanced 3-pin Euro-style detachable terminal block 2 x 3-pin XLR 2 x 1/4" TRS
Cooling	Continuously variable speed fan, back-to-front airflow
Output Connectors	Touch-proof binding posts 2 x Neutrik Speakon
Controls Front Panel	AC switch Channel 1 gain knob Channel 2 gain knob
Controls Rear Panel	10-position DIP switch
Indicators	Power-on: green LED Signal: yellow LED (1 per channel) Clip: red LED (1 per channel) Protect: red LED (1 per channel)
Power Requirements	100, 120, 230 VAC at 50 to 60 Hz (factory configured)
Protection	Amplifier: Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads Load: Turn-on/off muting/AC coupling (850, 1450)/ Triac Crowbar (1050HD, 2450, 4050HD, 5050) on each channel
Rack Spaces	2
Plug Type	100/120V: NEMA 5-15 230V: CEE7/7
Dimensions (H x W x D)	3.5 x 19.0 x 15.9" (89.0 x 482 x 404 mm)
Weight	40.0 lb (18.2 kg)

DigiLog 保固

關於 DigiLog

使用評論：

目前尚無評論

購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定，網路購物享有商品到貨日起算七天猶豫期。必須提醒您，「猶豫期並非試用期」，鑑賞期目的為提供您檢視、參考，並非提供您商品的試用，若您收到商品經檢視後有任何不合意之處，請勿拆封使用，並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝，且勿缺漏各項配件及贈品，或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件，可能會引響到您的退換貨權益，也可能依照損毀狀況扣除復原之相關費用。