Audio Damage ADM16 DUBJR MK2 | DigiLog 聲響實驗室
買器材 » 模組化合成器 » Effects » Audio Damage ADM16 DUBJR MK2
Adm16
Adm16

Audio Damage ADM16 DUBJR MK2

滿 NT$ 3,000 全台免運費

促銷價 NT$ 12,400

分期資訊:
30 利率,每期 NT$ 4,133
60 利率,每期 NT$ 2,066

商品狀態:無法購買

保固資訊:1 年保固 (不包含: 配件、線材、modular)
滿 NT$ 3,000 全台免運費
付款方式: 7 11 Family mart Hilife Ok Visa Jcb Atm Cash delivery
加入慾望清單
已加入慾望清單

Watched 此商品被關注 3884 次

DubJr Mk2 is a major update to our first and most popular module. We started with the same delay you already know and love from ADM01 and Dubstation, and added tap tempo, a clock input, and a feedback loop, and squeezed it to 6HP, to make it the perfect delay for live performance. 

With up to 1 second of pristine 48kHz/24bit delay time, and both "pitching" resampling and "jumping" non-resampling modes, DubJr Mk2 is an incredibly handy module. It can even do a sort of Karplus-Wrong synthesis if you stick an oscillator in the clock input. (Although, caveat emptor, it is only accurate or, well, interesting over about an octave. After that, your mileage may vary. Wildly.) 

When in clocked mode, crazy tempo-synced glitching effects are possible by modulating the TIME/DIV control. The TONE switch defeats the saturation and filtering inherent in the Dubstation delay sound, for a crystal clear delay. The external feedback loop allows you to patch your favorite filter/waveshaper/reverb/chorus/whatever directly in to the feedback loop for further sonic exploration. All in all, a worthy successor to the venerable DubJr, and a must-have for any live performance modular.

 

Features

» The TIME/DIV knob controls the delay time. When the MODE switch is in "SYNC" mode, this knob is a divisor for the clock input or tap tempo, in musically useful divisions from 1/4 to x6 of the clock. When the MODE switch is in the "FREE" position, this knob is a direct control of the delay time, and the tap tempo or clock input has no effect. 

» The FEEDBACK knob controls the regeneration of the delayed signal. When an external feedback loop is used, it is an attenuator on the input, and when the internal feedback routing is used, it is a direct level control over the feedback signal. 

» The MIX knob controls the wet/dry mix of the MIX output. 

» The CLOCK input and button control the internal clock when the unit is in SYNC mode. An LED shows the timing of the clock. The CLOCK input will trigger with any input signal over 1V (obviously, a pulse works best here) and will respond accurately up to low audio rates.

» The MODE switch controls whether the delay algorithm runs in resampling mode or not, and whether it uses its internal clock or the the clock input. When the unit is in FREE mode, the clock input and tap tempo button have no effect.

» The FEEDBACK output is a 100% wet output, unaffected by the MIX control. The FEEDBACK input, when used, changes the topology of the internal structure to inject this input in place of the internal feedback loop.

» 48kHz 24 bit audio path with a high-quality Cirrus-Logic AD/DA convertor. 10Vpp CV control over all parameters. 

» USB port (on the PCB board) for easy firmware updates. 

» High-quality 100% Made In The USA construction, including panel-bolted 100,000-cycle BI potentiometers and custom stamped Rogan knobs. 

» Power draw is 40ma from the +12V rail and 9ma from the -12V rail. This module has an on-board regulator and does not require +5V. Module depth is 25mm.

» DubJr Mk2, like all Audio Damage hardware products, includes our lifetime unconditional warranty.

DigiLog Line

DigiLog 保固

關於 DigiLog

使用評論:

目前尚無評論

購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定,網路購物享有商品到貨日起算七天猶豫期。必須提醒您,「 猶豫期並非試用期 」,鑑賞期目的為提供您檢視、參考,並非提供您商品的試用,若您收到商品經檢視後有任何不合意之處,請勿拆封使用,並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝,且勿缺漏各項配件及贈品,或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件,可能會引響到您的退換貨權益,也可能依照損毀狀況扣除復原之相關費用。


Q2 . 如何辦理退換貨?

若您確定要辦理退貨,請務必保持商品全新完整包裝,且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等,均須包含在內,勿缺漏任何一項。若有其他可歸責您的原因,造成商品損毀,將無法辦理退貨,或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題,則不在此限,享有無條件退換貨服務。

請於鑑賞期內來電或來信,詳細告知我們欲退換貨之原因、商品現況、電話,及取件的地址,我們將於 3 - 5 個工作天內安拍退貨事宜。


Q3 . 如何收到退款、需要多少時間?

依不同付款方式,退款方式與時間也不同,說明如下:

信用卡付款:帶我們收到退貨商品後約 5 至 7 個工作天,款項將會退至您信用卡帳戶。請依信用卡結帳日判斷,刷退款項可能列於本月或次月帳單,退款進程請向信用卡發卡銀行確認。

匯款:請聯絡 service [at] digilog.tw 並提供您的完整匯款資料(銀行、分行名稱、銀行代號、戶名、帳號),我們將派快遞公司前去取回您的退換貨商品,並於 5 至 7 個工作天,將款項匯還至您所指定的帳戶。


Q4 . 商品維修的運費需要自行負擔嗎?

商品維修的往返運費須自行負擔。

Digilog