買器材 » 模組化合成器 » VCA » Malekko Heavy Industry Quad VCA
Quad VCA is a 4-channel, advanced voltage controlled attenuator with an analog signal path that can either be used stand-alone with an auto-save function to memory, or in tandem with the Varigate 4+ and 8+ for multiple preset recall over the power bus.
Input channels 2-4 are normalled to 1 and bi-polar CV inputs 2-4 are also normalized to CV input 1 for complex level and modulation routing (Scan), and each channel can also run independently with it’s own CV input. Each channel includes a mute function and all outputs are summed to a mix output. To adjust level and CV modulation per channel, use the Select Channel buttons and then adjust the Offset and Attenuverter controls.
When the Scan function switch is enabled, CV input 1 (with an LFO inserted as an example) will start scanning (scrubbing) channels 1-4 via the LFO and per the Offset and Attenuverter settings. For instance, if you want a smooth scan between four oscillator inputs, patch four oscillator waveforms into the Quad VCA channel inputs, insert an LFO on CV input one and then adjust the offset and attenuverter controls. Either patch the individual outputs or the mix output.
The remote switch allows you to switch from remote preset access (V4+ and V8+) or stand-alone from the front of the panel. All settings are saved.
Quad VCA is a complete 4-channel VCA and mixing solution with preset recall capability, all in 8hp.
Features include:
- 4 individual inputs and outputs and 1 mix output
- 4 Bi-polar CV inputs, accepting up to +/- 10v
- Switch for turning Scan (channel scrub) feature on or off
- Offset and Attenuvert controls per channel
- Remote switch on/off for either stand-alone mode with auto-save, or save multiple Quad VCA presets along with your Varigate 4+ and Varigate 8+
- Mute buttons per channel output
- 8hp
使用評論：
購物須知 Q&A
Q1 . 何謂鑑賞期?
依消費者保護法之規定，網路購物享有商品到貨日起算七天猶豫期。必須提醒您，「 猶豫期並非試用期 」，鑑賞期目的為提供您檢視、參考，並非提供您商品的試用，若您收到商品經檢視後有任何不合意之處，請勿拆封使用，並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝，且勿缺漏各項配件及贈品，或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件，可能會引響到您的退換貨權益，也可能依照損毀狀況扣除復原之相關費用。
Q2 . 如何辦理退換貨?
若您確定要辦理退貨，請務必保持商品全新完整包裝，且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等，均須包含在內，勿缺漏任何一項。若有其他可歸責您的原因，造成商品損毀，將無法辦理退貨，或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題，則不在此限，享有無條件退換貨服務。
請於鑑賞期內來電或來信，詳細告知我們欲退換貨之原因、商品現況、電話，及取件的地址，我們將於 3 - 5 個工作天內安拍退貨事宜。
Q3 . 如何收到退款、需要多少時間?
依不同付款方式，退款方式與時間也不同，說明如下：
信用卡付款：帶我們收到退貨商品後約 5 至 7 個工作天，款項將會退至您信用卡帳戶。請依信用卡結帳日判斷，刷退款項可能列於本月或次月帳單，退款進程請向信用卡發卡銀行確認。
匯款：請聯絡 service [at] digilog.tw 並提供您的完整匯款資料（銀行、分行名稱、銀行代號、戶名、帳號），我們將派快遞公司前去取回您的退換貨商品，並於 5 至 7 個工作天，將款項匯還至您所指定的帳戶。
Q4 . 商品維修的運費需要自行負擔嗎?
商品維修的往返運費須自行負擔。
最新器材
目前尚無評論