Power Rating |
Stereo mode (both channels driven)
8 Ω FTC 20 to 20,000 Hz at 0.1% THD: 450 W
8 Ω EIA 1,000 Hz at 0.1% THD: 500 W
4 Ω FTC 20 to 20,000 Hz at 0.1% THD: 650 W
4 Ω EIA 1,000 Hz at 0.1% THD: 750 W
2 Ω EIA 1,000 Hz at 0.1% THD: 1200 W
Bridge-mono mode 8 Ω FTC 20 to 20,000 Hz at 0.1% THD: 1300 W
Bridge-mono mode 8 Ω EIA 1,000 Hz at 0.1% THD: 1500 W
Bridge-mono mode 4 Ω EIA 1,000 Hz at 0.1% THD: 2400 W |
Signal-to-Noise Ratio |
> -100 dB |
Distortion |
SMPTE-IM: < 0.02%
For 8 and 4 Ω load
THD for 20 to 20,000 Hz at 10 dB below rated power: less than 0.03%
THD for 1,000 Hz at full rated power: less than 0.03% |
Input Sensitivity |
1.23 V (+4.0 dBU) at 8 Ω |
Voltage Gain |
50x (34 dB) |
Circuit Type |
2-tier Class H |
Power Consumption |
6.3 A
1/8 power pink noise at 4Ω 15.6 A |
Damping Factor |
> 300 at 8Ω |
Input Impedance |
10 kΩ balanced
20 kΩ unbalanced |
Frequency Response |
20 to 20,000 Hz +0/-1 dB -3 dB points
5 Hz to 50,000 Hz (LF filter bypassed/8 Ω) |
Input Connections |
Active balanced 3-pin Euro-style detachable terminal block
2 x 3-pin XLR
2 x 1/4" TRS |
Cooling |
Continuously variable speed fan, back-to-front airflow |
Output Connectors |
Touch-proof binding posts
2 x Neutrik Speakon |
Controls Front Panel |
AC switch
Channel 1 gain knob
Channel 2 gain knob |
Controls Rear Panel |
10-position DIP switch |
Indicators |
Power-on: green LED
Signal: yellow LED (1 per channel)
Clip: red LED (1 per channel)
Protect: red LED (1 per channel) |
Power Requirements |
100, 120, 230 VAC at 50 to 60 Hz (factory configured) |
Protection |
Amplifier: Full short circuit, open circuit, thermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
Load: Turn-on/off muting/AC coupling (850, 1450)/ Triac Crowbar (1050HD, 2450, 4050HD, 5050) on each channel |
Rack Spaces |
2 |
Plug Type |
100/120V: NEMA 5-15
230V: CEE7/7 |
Dimensions (H x W x D) |
3.5 x 19.0 x 15.9" (89.0 x 482 x 404 mm) |
Weight |
44.5 lb (20.2 kg) |