Mutable Instruments Tides | DigiLog 聲響實驗室
買器材 » 模組化合成器 » Modulation » Mutable Instruments Tides
1
1
2
3

Mutable Instruments Tides

購物滿 NT$ 5,000 免運費

NT$ 8,900

- 3 / 6 期分期 0 利率
- 滿 NTD 5,000 亞洲區免運費

商品狀態:補貨中

付款方式: 7 11 Family mart Hilife Ok Visa Jcb Atm Cash delivery

Tidal modulator

UP, DOWN. ONCE, FOREVER. SLOW, FAST. SOBER OR DRUNKEN

Tides is all about waves that go up and down, from minute-long cycles to audio rates… This module is Mutable Instruments’ unique take on the looping AD envelope generator – pushing this well-known trope to unknown territories.

The core of the module is a digital asymmetric triangle function generator, which can be used in AD and AR modes (for envelope generation), or looping (as a VC-LFO or VC-DO).

The triangle generator is followed by a wavetable waveshaper providing linear, exponential, logarithmic, sinusoidal, or arc-sinusoidal shapes for the A and D segments. Then, a second processor applies either a 2-pole low-pass filter to the waveform, smoothing its sharp edges; or a rubbery wavefolder, adding kinks and bounces to the waveform.

Because Tides has been designed from the ground up to work at audio rates with minimal aliasing, and because all its parameters are under voltage control, it can be used as a unique self-contained synth voice.

 

14HP

25mm

+12V:55mA-12V:5mA

 

Digital function generator

  • 3 operating mode: single shot (attack/decay), sustained (attack/sustain/release), looping (VC-LFO/VCDO).
  • 3 frequency ranges: low (20 minutes to 5 Hz), medium (0.05 Hz to 300 Hz), high (8 Hz to 10kHz).
  • Freeze gate input to stop the oscillator and hold its output.

A large palette of waveforms

  • Shape control with CV input – covering various combinations of linear, exponential, or sinusoidal segments.
  • Slope/asymmetry (A/D time ratio) control with CV input.
  • Smoothness control with CV input. From 0V to -5V, smoothes the waveform using a 2-pole digital filter, from 0V to +5V, adds bumps and kinks with a digital wavefolder.

Advanced functions

  • Output level CV input (digital VCA).
  • Dual outputs: standard unipolar waveform, and “double-shot” waveform with a positive spike during the ascent and a negative spike during the descent. At audio rate, both of them have a different sound.
  • Accurate V/Oct tracking with straightforward calibration procedure.
  • Clock input to lock onto a multiple or fraction of a trigger sequence, or to generate harmonies directly from an audio signal (PLL mode).

Specifications

  • All inputs: 100k impedance.
  • CV inputs: 12-bit, 1kHz for shape/slope/smoothness, 12-bit to 6kHz for FM, 12-bit 48kHz for amplitude.
  • CV Outputs: 16-bit, 48kHz.
  • Output levels: +/- 5V for the BI output, 0V to +8V for the other outputs.

 

 

使用評論:

目前尚無評論

Digilog