Erica Synths Fusion VCA V2 | DigiLog 聲響實驗室
買器材 » 模組化合成器 » VCA » Erica Synths Fusion VCA V2
Vca
Vca

Erica Synths Fusion VCA V2

滿 NT$ 3,000 全台免運費

促銷價 NT$ 9,400

分期資訊:
30 利率,每期 NT$ 3,133
60 利率,每期 NT$ 1,566

商品狀態:無法購買

保固資訊:1 年保固 (不包含: 配件、線材、modular)
滿 NT$ 3,000 全台免運費
付款方式: 7 11 Family mart Hilife Ok Visa Jcb Atm Cash delivery
加入慾望清單
已加入慾望清單

Watched 此商品被關注 4079 次

The core of Fusion VCA is a Russian miniature pentode 1Ж24B with power consumption comparable to an LED.

Features

 

  • Miniature pentode based VCA
  • Manual VCA bias control
  • Audio signal feedback control
  • Germanium diodes/tube overdrive
  • Waveshaping – signal deform
  • 2 input signal mixer
  • Overdrive flavour select switch

 

We developed unique audio and tube control circuits so Fusion VCA sounds like nothing you’ve heard before.

Feedback adds harmonics to the original signal and acts similar to cutoff knob on VCFs and Deform knob controls amount of distortion in germanium diodes based circuit.

All Fusion modules by default are configured to work with regular eurorack PSU.

Due to the fact that the cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection turn off the power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.

Erica Synths Fusion series modules are designed combining vacuum tubes and semiconductors therefore they bring warm, powerful sound and overdrive possibilities of vacuum tubes into your modular system. Erica Fusion series consist of range of modules used in sound shaping circuit – VCO, Mixer, real Ringmodulator using audio transformers and germanium diode ring, VCF, VCA and Analogue Delay/Flanger.

If you need a 6 to 6 pin  power cable included to your order (suitable for 6VAC PSU), please write that in the comment section during checkout process.

DigiLog Line

DigiLog 保固

關於 DigiLog

使用評論:

目前尚無評論

購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定,網路購物享有商品到貨日起算七天猶豫期。必須提醒您,「 猶豫期並非試用期 」,鑑賞期目的為提供您檢視、參考,並非提供您商品的試用,若您收到商品經檢視後有任何不合意之處,請勿拆封使用,並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝,且勿缺漏各項配件及贈品,或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件,可能會引響到您的退換貨權益,也可能依照損毀狀況扣除復原之相關費用。


Q2 . 如何辦理退換貨?

若您確定要辦理退貨,請務必保持商品全新完整包裝,且勿損毀原廠外盒。包含商品本體、配件、保證書、原廠包裝、附隨說明文件等,均須包含在內,勿缺漏任何一項。若有其他可歸責您的原因,造成商品損毀,將無法辦理退貨,或須將損壞費用於退款中扣抵。但商品如有新品瑕疵問題,則不在此限,享有無條件退換貨服務。

請於鑑賞期內來電或來信,詳細告知我們欲退換貨之原因、商品現況、電話,及取件的地址,我們將於 3 - 5 個工作天內安拍退貨事宜。


Q3 . 如何收到退款、需要多少時間?

依不同付款方式,退款方式與時間也不同,說明如下:

信用卡付款:帶我們收到退貨商品後約 5 至 7 個工作天,款項將會退至您信用卡帳戶。請依信用卡結帳日判斷,刷退款項可能列於本月或次月帳單,退款進程請向信用卡發卡銀行確認。

匯款:請聯絡 service [at] digilog.tw 並提供您的完整匯款資料(銀行、分行名稱、銀行代號、戶名、帳號),我們將派快遞公司前去取回您的退換貨商品,並於 5 至 7 個工作天,將款項匯還至您所指定的帳戶。


Q4 . 商品維修的運費需要自行負擔嗎?

商品維修的往返運費須自行負擔。

Digilog