Audio Damage ADM14 BOOMTSCHAK | DigiLog 聲響實驗室
買器材 » 模組化合成器 » Drum Module » Audio Damage ADM14 BOOMTSCHAK


滿 NT$ 3,000 全台免運費

促銷價 NT$ 21,500

30 利率,每期 NT$ 7,166
60 利率,每期 NT$ 3,583


保固資訊:1 年保固 (不包含: 配件、線材、modular)
滿 NT$ 3,000 全台免運費
付款方式: 7 11 Family mart Hilife Ok Visa Jcb Atm Cash delivery

Our goal with this product was to make a no-compromises, versatile drum voice with a 100% analog signal path, and that made us happy. The first part was relatively simple. The "happy" part took a while. But after over a year of R&D and many, many iterations, we're pleased to present ADM14 Boomtschak, a drum voice that we're proud to call ours. 

The left side of the unit comprises a triangle core oscillator, a VCA, two envelopes, and a waveshaper, and the right side is a noise source, multi-mode resonant filter, VCA, and one envelope. With a logical layout and versatile voice topology, Boomtschak is capable of face-melting kick drums and snares, and more strange percussion and sound FX than you can shake a (drum) stick at. The oscillator bottoms out at 5 Hz (!!!), and can track 1V/Oct over nearly seven octaves, so you can also use Boomtschak as a synth voice, for paint-peeling sub bass or a mallet-style melodic source higher up. 

The trigger and choke allow full control over the enveloping, while a velocity CV input allows dynamic control. These, plus control voltage inputs over pertinent values make Boomtschak incredibly expressive. All in all, it is one of the most versatile and potent drum voices available for the Eurorack platform. 


Pitch – sets the frequency of the VCO

Bend Depth  – controls how much the pitch-bend envelope generator changes the frequency of the VCO. This is a bidirectional control; at its center position, the EG has no effect on the VCO.

Bend Decay – sets the decay time of the pitch-bend EG.

Bend Shape – varies the shape of the pitch-bend EG from a sharp exponential curve to a linear ramp.

Amp Decay – sets the decay time of the envelope generator which controls the VCA for the VCO, and hence how long the VCO tone is heard.

Amp Shape - varies the shape of the VCO amplitude EG from a sharp exponential curve to a linear ramp.

Wave Switch – switches the VCO output between a triangle wave and a quasi sine wave.

Klik Tone – changes the brightness of a short click added to the beginning of the sound.

Waveshaper – controls a simple wave-folder which changes the shape of the VCO’s signal.

Filter Freq – sets the frequency of the multi-mode filter for the noise source.

Filter Q – sets the resonance of the filter.

Mod Source Switch – choose the source of modulation for the filter frequency. There are three options: the amplitude envelope generator for the noise source, the pitch bend oscillator for the VCO, and the VCO’s signal.

Mod Depth – controls how much the modulation signal selected with the MOD SOURCE switch changes the filter frequency. This is a bidirectional control; at its center position, the filter frequency will not be changed by the modulation signal.

Filter Mode Switch – chooses one of three filter response modes: low pass, band pass, or high pass.

Amp Decay – sets the decay time of the envelope generator which controls the VCA for the noise source, and hence how long the noise is heard.

Amp Shape - varies the shape of the noise amplitude EG from a sharp exponential curve to a linear ramp.

Mix – varies the relative loudness of the VCO and the noise source. At its center position, the noise source and VCO have roughly equal loudness. Rotate the knob counter-clockwise to hear more of the VCO, rotate it clockwise to hear more noise.

Level – sets the overall output level of the module.

Manual Button – press this to trigger the module manually. Use it while setting BoomTschak’s knobs or for live improvisation.

Trigger Input – Apply a positive-going rectangular wave to this jack to trigger the module. A +5V signal is best but the module will trigger at lower voltages.

Velocity – A control-voltage input for varying the loudness of the module. Positive voltages increase the loudness; negative voltages decrease it.

Choke – A positive-going rectangular pulse applied to this input will cut off (choke) the output of the module.

Filter Input – Plugging a signal into this jack will bypass the module’s noise source, passing the signal through the filter.

CV Inputs – There are five control-voltage jacks associated with some of the knobs. Applying a positive voltage to these jacks has the same effect as turning the associated knob clockwise; applying a negative voltage has the opposite effect.

Mechanicals - Boomtschak is 24HP wide, and has a depth of 16mm; it will fit in any skiff. It ships with a 16-conductor keyed power cable and four nickel-plated M3x6 screws. 


DigiLog Line

DigiLog 保固

關於 DigiLog



購物須知 Q&A

Q1 . 何謂鑑賞期?

依消費者保護法之規定,網路購物享有商品到貨日起算七天猶豫期。必須提醒您,「 猶豫期並非試用期 」,鑑賞期目的為提供您檢視、參考,並非提供您商品的試用,若您收到商品經檢視後有任何不合意之處,請勿拆封使用,並立即依照退貨規定辦理退貨。商品退換貨必須是完整包裝,且勿缺漏各項配件及贈品,或自行拆損原廠包裝與外盒。若有任何遺失、損毀或是缺件,可能會引響到您的退換貨權益,也可能依照損毀狀況扣除復原之相關費用。

Q2 . 如何辦理退換貨?


請於鑑賞期內來電或來信,詳細告知我們欲退換貨之原因、商品現況、電話,及取件的地址,我們將於 3 - 5 個工作天內安拍退貨事宜。

Q3 . 如何收到退款、需要多少時間?


信用卡付款:帶我們收到退貨商品後約 5 至 7 個工作天,款項將會退至您信用卡帳戶。請依信用卡結帳日判斷,刷退款項可能列於本月或次月帳單,退款進程請向信用卡發卡銀行確認。

匯款:請聯絡 service [at] 並提供您的完整匯款資料(銀行、分行名稱、銀行代號、戶名、帳號),我們將派快遞公司前去取回您的退換貨商品,並於 5 至 7 個工作天,將款項匯還至您所指定的帳戶。

Q4 . 商品維修的運費需要自行負擔嗎?